Examples of 'compared with a reference' in a sentence
Meaning of "compared with a reference"
Compared with a reference" - used to analyze or evaluate something in relation to a known standard or point of comparison.
How to use "compared with a reference" in a sentence
Basic
Advanced
compared with a reference
The wave is compared with a reference value.
Two new materials have been studied and compared with a reference.
This information is compared with a reference or a purchase order.
Changes in expression are better detected when a test sample is compared with a reference.
It is increased compared with a reference steel of the same grade.
The frequency response thus estimated is thereafter compared with a reference response.
It is compared with a reference signal corresponding to a fiber free of coating faults.
These are combined and compared with a reference.
This position is compared with a reference input signal by the control circuit.
Likewise this reaction torque may be compared with a reference value.
These results are compared with a reference sample not having been subjected to nickel deposition.
The value of the discharge current is compared with a reference voltage.
These samples were compared with a reference not comprising the bottom layer of foam.
The signal is then integrated and then compared with a reference voltage.
The measured current is compared with a reference current previously set by the current determining unit.
See also
The current average value thus obtained is compared with a reference value.
This voltage is then compared with a reference voltage generated at 9 by the amplifier 8.
A sampled signal corresponding the amplified signal is compared with a reference value.
This measuring signal is then compared with a reference value and an error signal is determined.
The amino acid pattern of samples were examined and compared with a reference value.
The acquired images are then compared with a reference image to evaluate any print imperfections.
The determined ratio relating to the sample from the individual is compared with a reference.
The control current is compared with a reference value.
Commonly, though not necessarily, the result obtained for the sample is compared with a reference.
The cleaned surface was compared with a reference scale.
The response of the antenna is measured during the plateau and compared with a reference response.
This actual position was then compared with a reference position digitized and recorded in the controller.
The non-energized winding is integrated and compared with a reference.
The measured temperature is compared with a reference value by the electronic processing unit 13.
Fig . 3 shows a velocity estimate obtained using the present invention compared with a reference velocity.
This voltage VS will be simply compared with a reference voltage through a comparator.
The real speed of rotation is continuously measured then compared with a reference speed of rotation.
This signal is then compared with a reference position signal input to the servo-control circuits.
The amplitude of the voltage Va can be compared with a reference value.
The voltage Ui is compared with a reference voltage Ur, in a comparator 24.
According to the invention, the current fiN is compared with a reference value IMAX.
The DC voltage is compared with a reference voltage by a comparator 65.
Additionally, the orientation θ of the robot can be estimated compared with a reference direction 103.
This signal is compared with a reference threshold 18.
In particular, in the example described here, the signal A is compared with a reference level 31.
Voltage V3 is compared with a reference voltage, not shown.
The same is true if Vc is compared with a reference value.
The preamble is compared with a reference preamble at step 404.
Cycle characteristics of women aged over 40 years compared with a reference population of young women.
The amplified earth leakage signal is compared with a reference voltage set by a level discriminator.
The resulting averaged video level is compared with a reference level ( LR ), and.
The filtered signal Y ( t ) is compared with a reference signal R ( t ) by a subtracter element 50.
After cooling, the absorbance at 495 nm is measured and compared with a reference sample ( standard solution ).
Instead, measurements are compared with a reference population.
This measured distance is compared with a reference distance.
You'll also be interested in:
Examples of using Compared
Show more
Lowest compared to other renewable energy sources
I should not have compared you to jane
Compared to a katana all other swords are toys
Examples of using Reference
Show more
Components of terms of reference covered by the review
Unique reference identifying a particular consignment of goods
This listing is for reference purposes only
