Examples of 'compression nut' in a sentence
Meaning of "compression nut"
A compression nut is a type of fastener used in plumbing and mechanical systems. It is typically used to secure and create a watertight seal between two pipes or fittings. The nut is tightened onto a threaded pipe or fitting, compressing a ferrule or gasket against the pipe to prevent leaks
How to use "compression nut" in a sentence
Basic
Advanced
compression nut
For models with a compression nut only.
Tighten compression nut to outlet with adjustable wrench.
Do not over tighten the compression nut.
Slip a compression nut onto each pipe.
Hygienic fitting with compression nut.
Tighten compression nut to water valve.
And tighten the compression nut.
Loosen compression nut of the cable entry gland.
Slip the compression sleeve and compression nut on the.
Loosen compression nut holding aluminum tube at the burner.
Install the banjo boot over the compression nut.
Tighten the compression nut securely.
Slide ferrule against elbow and secure with compression nut.
Slide the compression nut down.
Compression nut and compression sleeve to connect to the water supply valve.
See also
Place the brass compression nut over the tubing.
Compression nut and compression sleeve to connect to the refrigerator water inlet.
Slip compression sleeve and compression nut on copper tubing as shown.
Screw compression nut onto coupling and tighten with wrenches.
Install the banjo boot and compression nut onto the hose.
Place a compression nut and sleeve on the copper tubing.
Pull the hose boot away from the lever to access the compression nut.
Install the compression nut onto the hose.
Connect the copper tubing water supply to the water valve inlet with a compression nut fitting.
Tighten the compression nut of the cable entry gland.
Install the hose firmly into the brake caliper while threading the compression nut by hand.
Tighten the compression nut onto the compression fi tting.
Once secured, tighten the compression nut.
Slip the compression nut through the plastic tubing.
Using an adjustable wrench, tighten the compression nut.
Slide compression nut and sleeve onto copper tubing.
Slip the compression sleeve and the compression nut onto the copper tubing as shown.
Loosen compression nut of the cable gland and remove blind plug.
Use an 8 mm flare nut wrench to unthread the compression nut.
Tighten the compression nut onto the compression fitting.
Use an 8 mm flare nut wrench to remove the hose compression nut.
Slide the compression nut down to the water inlet.
The assembled components are held in place therein by tightening the compression nut 52.
Slide the compression nut over the electrical cord.
Connect to the tubing adapter as shown in second illustration, tightening the compression nut securely.
For models with a compression nut and a hex hose stop.
We recommend using a water line installation kit that contains copper tubing and ¼ ” compression nut.
Then remove the compression nut from the wire liner.
Slide ferrule ( sleeve ) into valve inlet and finger tighten compression nut onto valve.
Slide the compression nut and then the ferrule over.
A cable gland according to claim 6, wherein the skid washer clips into the compression nut.
Thread the compression nut into the lever body by hand.
For the same reason, the rear external part of the compression nut 4 is also hexagonal.
Screw the compression nut onto the outlet end with a wrench.
Insert water line into 90 elbow oSlide ferrule against elbow and secure with compression nut.
You'll also be interested in:
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
Examples of using Compression
Show more
Compression must take place before encryption
Provides engine compression braking at low speeds
Compression straps easily adjust to volume of content
