Examples of 'compression pressure' in a sentence
Meaning of "compression pressure"
compression pressure: This term typically refers to the force applied to compress or compact a material or substance. It is commonly used in fields such as engineering, physics, and mechanical systems to describe the pressure exerted during compression
How to use "compression pressure" in a sentence
Basic
Advanced
compression pressure
Measure the compression pressure on all cylinders.
Check engine speed when measuring the compression pressure.
Check the compression pressure of each cylinder.
Check each cylinder using a compression pressure gauge.
Compression pressure with oil applied into.
Equalizes and increases compression pressure in cylinders.
The compression pressure in the cylinders of the engine.
Check genset speed when measuring the compression pressure.
Releases compression pressure to make starting easier.
An electronic controller may be adopted for controlling the compression pressure.
Attach the compression pressure gauge.
Hardness of the resulting tablet is a direct function of the compression pressure employed.
Check of compression pressure.
Compression pressure was not high enough to effectively fragment calcium phosphate.
This indicates that the correct compression pressure has been reached.
See also
The compression pressure used can be different for different materials.
Release starter tension slowly to prevent engine from reversing due to compression pressure.
The compression pressure reading of a cylinder is a good indicator of its internal condition.
Stents are mechanical devices that are designed to counter compression pressure when they are expended.
The compression pressure is important since it has a certain effect on the resonance frequency.
Check each cylinder with the glow plug removed using a compression pressure gauge.
The first compression pressure and the second compression pressure may be the same or different.
Ezetimibe release was satisfactory although release decreased to some extend with increased compression pressure.
Compression pressure Tablet weight.
By gradually reducing compression temperature, he depicted a gradual reduction in compression pressure.
Releases compression pressure to make starting easier - when activated.
Implementing at least two stages of applying compression pressure to the mold ;.
However, the compression pressure may vary between different engines.
Beginning heating of the mold at the beginning of applying compression pressure to the mold ;.
In one implementation, the compression pressure is approximately 3 pounds per square inch.
Beginning heating of the mold after beginning to apply compression pressure to the mold ;.
The compression pressure on the metal electrode can be exerted via the spacer 8.
At equal porosities, the nuclei require a lower compression pressure than the corresponding powders.
If the compression pressure is lower than repair limit, check the engine parts affected.
The results are shown in Figure 13 as a graph of wafer density versus compression pressure.
If the compression pressure is lower than repair limit, check the genset parts affected.
A predetermined pressure of 2 to 3 bar is applied as a compression pressure into the container 15.
The term " final compression pressure " means the compression pressure in the combustion cylinder before combustion.
The final blend is compressed into tablets using a compression pressure of 27 kN.
Again, the compression pressure will depend upon the specific aromatic and non-aromatic components involved.
The hardness was lower than that at the compression pressure of 1.4 ton.
The first compression pressure may be about twenty pounds per square inch ( PSI ).
It adopts hydraulic system to compress, and the maximum compression pressure can be 22Mpa.
Compression pressure of a rotary tablet machine may be preferably more than 300kg.
The compression chamber 10 also has a pressure gage 16 or sensor for monitoring the compression pressure.
When the compression pressure is lower than 1 t/cm2, densification may not take place sufficiently.
The package was subsequently cooled to a temperature of 60°C under the same compression pressure.
This compression pressure P e then reaches the shrinkage pressure having a value P def, about 3 to 6 MPa.
In a particular embodiment, the compressor 18 has a compression pressure ratio of approximately 4:1.
The compression pressure used should be in the range of 0.5 to 5 tons.
You'll also be interested in:
Examples of using Pressure
Show more
No effect on blood pressure or pulse rate was observed
Pressure transmission pipe in the combustion chamber
We were under a lot of pressure because of the family
Examples of using Compression
Show more
Compression must take place before encryption
Provides engine compression braking at low speeds
Compression straps easily adjust to volume of content
