Examples of 'compressive stresses' in a sentence
Meaning of "compressive stresses"
compressive stresses: Forces that act to compress or squeeze an object or material from all sides
How to use "compressive stresses" in a sentence
Basic
Advanced
compressive stresses
The area is under compressive stresses.
Shear and compressive stresses are then generated in the membrane.
This enables a considerable reduction in internal compressive stresses.
Such compressive stresses are not wanted during the operation of the engine.
In conventional rolling deformation results mainly compressive stresses.
Compressive stresses inside a flaw or crack do not contribute to the crack growth.
The jackbolts are subject to very high compressive stresses.
Creation of such compressive stresses is recognised in the art as a highly desirable feature.
Negative values in the tables represent compressive stresses.
These locked in compressive stresses are a good protection against fatigue cracking in use.
The original conduits are generally designed to resist compressive stresses.
The compressive stresses in the material were introduced by shot peening as described above.
Particulate composites reveal superior mechanical properties under compressive stresses.
This represents the transmission of compressive stresses through the solid polymer.
If compressive stresses are enough these can cause compressive yielding or eventually rock fracture.
See also
Permissible tensile tensile and and compressive compressive stresses stresses.
These compressive stresses are locally amplified taking into account the presence of grooves.
One technique for toughening glass is to trap compressive stresses in its surface.
These tensile and compressive stresses cause tensile and compressive strains respectively.
Concrete compressive strength increase led to a proportional increase of the struts compressive stresses.
Shot peening is a method for introducing compressive stresses in the surface of the material.
The rubber wedges are well suited to withstand the resulting triaxial compressive stresses.
This process generates large compressive stresses which make the coatings susceptible to damage.
The substrate can be peened to impart or produce residual compressive stresses in the substrate.
Surface compressive stresses confer resistance to metal fatigue and to some forms of stress corrosion.
The ability of the material to resist much higher compressive stresses will thus be wasted.
The compressive stresses then become tensile stresses, and vice versa.
With these results we can deposit a film with high compressive stresses for delamination.
In fact, the compressive stresses are well supported and well distributed in a homogenous zone.
This configuration enables the stabilizer rigidly to oppose both tensile stresses and compressive stresses.
The impact of the shot creates compressive stresses in the metal down to a certain depth.
A trade-off is therefore to be found between tensile and compressive stresses.
For the remaining height of, the compressive stresses in concrete is neglected.
At the time of installation, the rail is free of any tensile or compressive stresses.
Also, residual compressive stresses are developed in the wall material about the opening.
In this case, the tensile and compressive stresses are high.
This causes compressive stresses on the pane, which may eventually cause it to break.
In some cases, the collar bears the compressive stresses.
F the distribution of compressive stresses in the concrete follows a parabolic-rectangle stress-strain diagram.
Steel 3 has the least ability to maintain the compressive stresses at high temperatures.
This produces compressive stresses during firing or cooling, which the ceramic easily tolerates.
First, the spoke tension produces compressive stresses in the rim body.
Abrasive wheels for free-hand cutting are subjected to particularly high bending and compressive stresses.
This makes it possible to limit the compressive stresses transiting trip dogs 88 to acceptable values.
In a configuration as complex as a turbomachine impeller, certain locations may experience compressive stresses in operation.
As is known, compressive stresses can, however, be absorbed well by glass.
However, the tangential stresses change to large compressive stresses on the surface of the diamond.
Leave, at the bases, only the required material for withstanding the tensile or compressive stresses.
The compressive stresses induce a pure bending and compression of the strip ( 1 ).
Compressive structures, Compression structures develop mainly compressive stresses under the action of axial loads.
You'll also be interested in:
Examples of using Compressive
Show more
Development of compressive strength based on time days
And do not think we can be as compressive as you
A compressive dressing was applied without wrist immobilization
Examples of using Stresses
Show more
Mitigating the stresses that drive change
Stresses the need for general disarmament
My life coach always stresses the importance
