Examples of 'conductivity increases' in a sentence
Meaning of "conductivity increases"
conductivity increases - this phrase is used in a scientific context to describe the rise in the ability of a material to conduct electricity
How to use "conductivity increases" in a sentence
Basic
Advanced
conductivity increases
The conductivity increases with exposure to light.
High dynamic binding capacity at high conductivity increases productivity.
Conductivity increases with total dissolved solids in water.
An example of this is copper wire whose conductivity increases with introduction of impurities.
The conductivity increases with the amount of salts.
From this figure it is clear that conductivity increases with molecular mass.
The conductivity increases strongly after the second cycle of deposition.
Semiconductors are materials whose electrical conductivity increases with the influx of light or heat.
The conductivity increases very substantially after drying under vacuum.
A thermistor is a special semiconductor diode whose conductivity increases with the diode temperature.
The heat conductivity increases with increased grain size.
The problem therefore becomes increasingly difficult to solve as the desired thermal conductivity increases.
The ionic conductivity increases when the length increases.
NTC resistors have a negative temperature coefficient and their conductivity increases as temperature increases.
So the conductivity increases.
See also
As the ion concentration increases, the conductivity increases.
The conductivity increases to a certain level characterising the destabilisation time.
As the product heats up, electrical conductivity increases linearly.
The heat conductivity increases with lower binder phase content.
As a result, there conductivity increases.
The conductivity increases to reach a plateau characterising the total dissolution of the powder.
Upon doping, the bond alteration is diminished in conductivity increases.
The electrical conductivity increases with the content of conductive particles in the solvent.
However as the baking temperature increases, the thermal conductivity increases.
Beyond this threshold conductivity increases markedly as additional electrically conductive filler is added.
It is also a semiconductor, which means that its electrical conductivity increases with temperature.
After this point conductivity increases only slightly with increasing pressure and density.
Thus, the thickness of the graphite felt 9 decreases and its thermal conductivity increases.
For this reason the ion conductivity increases strongly with the temperature.
At larger temperature gradients, more ice lenses form and hence the hydraulic conductivity increases.
This conductivity increases and decreases depending on the hydration level of the cellular structure.
Low electrical resistance, Improving device conductivity increases the rectified power output.
Since thermal conductivity increases with relative density, wood is a better insulator than dense construction materials.
The measures are performed at 400 ° C. It is observed that the conductivity increases with pressure.
The tree ring hydraulic conductivity increases and stabilises after two years also.
The conductivity increases or decreases with the particulate content in a non-linear manner for this example.
Moreover, the electronic conductivity increases with the oxygen content.
Their conductivity increases with temperature, they thus constitute substances that have a so-called “ negative ” temperature coefficient.
When passing to the molten state, the conductivity increases considerably and follows a VFT law.
Moreover, the conductivity increases upon exposure to light.
As a result, molar conductivity increases with dilution.
Preferably, the conductivity increases with the strip length.
Thus, the electric conductivity increases almost exponentially with altitude.
As the tablet dissolves the conductivity increases until complete dissolution ( at 100 % of maximum conductivity ).
You'll also be interested in:
Examples of using Conductivity
Show more
Note the conductivity registered by the controller
Continuously measures the conductivity of the effluent
Poor conductivity and slow to absorb heat
Examples of using Increases
Show more
An uneven surface increases the risk of overturning
Increases or decreases the high frequency response
The start time increases when turned
