Examples of 'cone and plate' in a sentence
Meaning of "cone and plate"
cone and plate - can refer to a scientific experiment or setup involving cone and plate geometry
How to use "cone and plate" in a sentence
Basic
Advanced
cone and plate
A cone and plate geometry was used.
The measurements can be made with a cone and plate arrangement.
Cone and plate viscosimeter.
A small torque was applied to centre the sample between the cone and plate.
Cone and plate viscomneter operated at high shear rate.
The viscosities were measured using a Brookfield cone and plate viscometer.
Cone and plate viscometer operated at high shear rate.
High shear viscosity was measured by ICI cone and plate viscometer.
This is a cone and plate system, with two cones employed.
Viscosity is measured using Brookfield viscometers with cone and plate attachment.
This is carried out by a cone and plate rheometer such as a Bohlin CVO.
The viscosity of each solution was measured using a Brookfield Instruments cone and plate viscometer.
This dispersion had a cone and plate viscosity Brookfield Model No.
The melt viscosity was determined using the ICI cone and plate viscosimeter.
Elasticity was measured by a dynamic cone and plate viscometer at 20 % strain as described.
See also
In each case, the viscosity of the solutions was measured using a cone and plate viscometer.
Hydrogels were placed between the cone and plate ( cooled down at 4°C ) and measured after 10 minutes.
The chart recorder is calibrated, and the gap between the cone and plate is set.
Viscosity can be measured by a Brookfield cone and plate viscometer, or other equivalent method.
Viscosity measurements were measured at 20 °C using a Sheen Viscomaster CP1 cone and plate viscometer.
Polyol viscosities are measured using a cone and plate viscometer at 20 °C.
Approximately 1mL of sample was dispensed into a 60mm diameter 60-degree cone and plate geometry.
The geometry consisted of a 60 mm cone and plate with a 2 ° angle.
The viscosity of the solution was measured using a, Brookfield Cone and Plate Rheometer.
The viscosities are measured with a Brookfield cone and plate viscometer, Model DVII, at 25°C.
The final product was a low viscosity clear liquid having a cone and plate viscosity of 230 cP.
Rheological measurements were performed on a TA rheometer with cone and plate geometry at room temperature.
A Contraves Rheomat 115 rheometer is used with a cone and plate orientation.
Viscosity measurements were performed according to the ICI cone and plate method at 100 °C.
A Rheometrics Scientific DSR-500 dynamic stress-controlled rheometer with a cone and plate sample fixture was used.
The viscosity traces were obtained using a cone and plate viscometer at 6.3 s-1.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Cone
Show more
Nose cone does not get cherry red
I left an ice cream cone in my cup holder
Rotary cone sample divider vibratory feeders
