Examples of 'connect the cables' in a sentence
Meaning of "connect the cables"
connect the cables - This phrase refers to the act of joining or linking cables together in order to establish a connection or transfer signal or power between devices or systems.
How to use "connect the cables" in a sentence
Basic
Advanced
connect the cables
Connect the cables and power cord.
Make sure to connect the cables as follows.
Connect the cables as the following instructions.
Use a crimping tool to connect the cables.
Connect the cables quickly and firmly.
Remove the jumpers and connect the cables as shown.
Connect the cables firmly and securely.
Replace the projector on the boom and connect the cables.
How to connect the cables to the batteries.
Slide the levers into position on the handlebar and connect the cables.
Connect the cables to the roadside panel.
Unwind speaker cables and connect the cables to the main unit.
Connect the cables for power supply.
Bring the speaker to the bracket and connect the cables as outlined in this manual.
Connect the cables to the following audio jacks.
See also
The connection terminals have a pluggable design and can be removed to connect the cables.
The ports to connect the cables are indicated.
The LG wall mount is easy to adjust or to connect the cables.
Connect the cables as illustrated below.
Off the Deckard and disconnect and connect the cables several.
To connect the cables of output to the respective terminals ac.
The thermal protection trips Connect the cables correctly to the terminal boxes.
Connect the cables as shown in figure.
EN Leave the subwoofer in the box when you connect the cables.
Connect the cables as shown in the following illustration.
Check the shape of the connectors, and connect the cables.
Connect the cables according to fig.
You must on no account connect the cables wrongly - risk of a cable fire.
Connect the cables to the transceivers.
Once the outdoor station fixed, connect the cables to the corresponding thermo-hygro socket.
Connect the cables to the battery.
After installing the maintenance kit, Connect the cables to the rear of the printer.
Connect the cables to the eyebolts.
Bi-amping operation Open the jumpers and connect the cables according to the illustration.
Connect the cables according to the table below.
Pull the cables through the wall bracket, see Connect the Cables on page.
Do not connect the cables to the wrong polarities.
Installing this product p Before you completely install this product, connect the cables.
Connect the cables as indicated in the image above.
And hope we do not blow out the entire Los Angeles power grid . Connect the cables.
Connect the cables coming from the frame.
Now, you need to connect the cables.
Connect the cables and position them correctly.
The RLP200 is fitted with readily accessible terminal strips to connect the cables.
Connect the cables to the starter.
The RLL400 is fitted with plug connectors and terminal strips to connect the cables.
Connect the cables in the package.
Now what? Connect the cables.
Connect the cables to the detectors and the alarm.
Otherwise, see Figure 37 to connect the cables.
You'll also be interested in:
Examples of using Cables
Show more
Run cables across foam gasket block
Check the battery cables and terminals
Power cables may not be submerged in water
Examples of using Connect
Show more
Connect the adapter into a main socket
I feel the need to connect with someone
Connect stereo headphones or powered external speakers
