Examples of 'connecting pins' in a sentence
Meaning of "connecting pins"
connecting pins - These are small metal pieces used to establish a connection between two objects or components. They are commonly found in electronics, connectors, or sockets where they enable the transfer of signals or power
How to use "connecting pins" in a sentence
Basic
Advanced
connecting pins
Regularly inspect the pins and connecting pins.
The connecting pins may also be deposited on both sides of the substrate.
A fewer or greater number of connecting pins may be used.
Method of bonding connecting pins to the eyelets of conductors formed on a ceramic substrate.
The connector has a plurality of electrically conductive connecting pins.
It is secured to the substrate by connecting pins or other connecting or securing means.
The connecting pads are where necessary fitted with connecting pins.
Replacement of fractured connecting pins is inconvenient to consumers and potentially expensive to warranty providers.
Regularly put some grease on the pins and connecting pins to prevent wear.
A greater number of connecting pins is desired near the vertical center of the wall assembly.
Afterwards the data is transferred into the circuit by applying signals to the connecting pins.
Make sure the hard drive connecting pins and the connectors are properly aligned.
The system comprises a plurality of blocks, connecting pins and stakes.
The AED has two connecting pins to be inserted in the receptacles.
The brake rigging comprises a series of levers, rods and connecting pins.
See also
Make sure that the hard drive connecting pins and the connector are properly aligned.
The connecting pins are then fitted in the desired form during stage C of the process.
Process for varnishing a card equipped with connecting pins and card obtained in this way.
Two connecting pins 4 will correspond to each coil housing.
The chain links were assembled using connecting pins that were cut to 7 inches long.
Turn all connecting pins used in portable panels to the side of least pressure 46.
When not used, leave these jacks connected with the supplied connecting pins.
Without the electrodes, connecting pins have no commercial value.
Frequently, the diode is joined to the radiator at the face bearing the connecting pins.
It is preferred that the connecting pins 18 are made or covered with an antiabrasive material.
These were initially X-shaped and sat between the two connecting pins.
At the level of the connecting pins 2 there are often however a few ceramic pieces.
There is no intermediate restriction of any connecting pins 11.
The plurality of connecting pins 21 a are spaced from each other with a constant interval therebetween.
The stack pads are covered by an electrical insulating ring 90 bearing connecting pins 91.
Connecting pins 15 are inserted laterally in the side grooves 14 so as to be laterally movable.
The contact conductors 45 and the coil connections are terminated by connecting pins or tabs 62.
Connecting pins 7 are accessible from the exterior of part 2b of the body through a suitable opening 9.
The control terminal 21 is provided with a plurality of connecting pins 21 a having a predetermined length.
Connecting pins 364 extend through aligned openings in the junctions between adjacent wall panels.
The folded metal paths 12 thus form the electric connecting pins of optoelectronic module 2.
The number of connecting pins 58 and terminals 59 is a matter of design choice.
The stator winding is made using a plastic former 41 equipped with fixing and connecting pins 42.
A fitting process according to claims 1, wherein the connecting pins are wires having a circular cross-section.
Connecting pins 12 can be inserted and welded in metallised holes 41 of printed circuit board 4.
These pins 56 could possibly be connecting pins of the sensor 14.
The connecting pins 46 are embedded in piercings 54 formed through the electronic circuit support plate 34.
Link plates 2 are connected by insertion of connecting pins 3 into pinholes 22 of link plate 2.
The connecting pins 30 are then installed, using a hammer or mallet ( because of the press-fit ).
The optoelectronic chip 42 is electrically connected to the electrical connecting pins 44 through the carrier 40.
For this, a potentiometer is used, connecting pins 1 and 3 to a source of voltage and ground, respectively.
Packages 2 are also shown in dotted lines together with their connecting pins 21, flush with face 31.
The electrical connecting pins 44 stick out with respect to the first face 46 of the carrier 40.
The tube portion 62a protects the fitting protrusion 64 and connecting pins 66, and keeps their water proofing.
The electrical connecting pins 44 of the laser diode 24 penetrate into the semi-fluid or fluid adhesive.
You'll also be interested in:
Examples of using Pins
Show more
Spotting pins and betting on the games
I will just order a few replacement pins
That the pins on plug of extension cord
Examples of using Connecting
Show more
Using the accessories connecting the accessories
Connecting under the current user account
She was really connecting with the fans
