Examples of 'contact closure' in a sentence
Meaning of "contact closure"
Contact closure refers to the physical or electrical connection between two contact points, resulting in the completion of an electric circuit. It is commonly used in electronic systems or devices
How to use "contact closure" in a sentence
Basic
Advanced
contact closure
Recalling a preset using a switch or contact closure.
Requires dry contact closure to activate.
Contact closure ports at the rear of an AutoQuest autosampler.
The external alarm shall be triggered by contact closure.
Contact closure is shown with the magnetic float below the switch.
Recalling a preset with a push button or contact closure.
Contact closure between tip and sleeve is reached when the footswitch is employed.
There are different styles available but most common is a contact closure switch.
Alarm detection for sensor contact closure and video loss in camera inputs.
Contact closure shown for both conditions of the switch relative to the magnetic float.
An effective and mechanically very fast contact closure can be achieved in this way.
When material reaches the rotating vane, rotation stops, actuating a microswitch contact closure.
Optional IR receiver and contact closure interface available.
The sd detects short circuit, open circuit and contact closure.
The input is triggered with a contact closure to COM, or with an active low signal.
See also
Activation / deactivation of the MUTE function by means of a switch or contact closure.
Force-Off - allows an external contact closure to force its associated input to turn off.
Pin 4 provides a control terminal to initiate a page announcement via contact closure or signal activation.
Status Output, Contact closure indicates normal detector operation.
A lamp and battery can be used to test for contact closure or wire continuity.
Two contact closure signals ( Open collector type ) are output through the Alarm Output connector.
Should ideally be in the CONTACT position contact closure activation using the MPAGE4 keys.
Contact closure activated alarm input x4.
Loudspeakers, 2 outputs, music speech activated at all times and speech only activated on contact closure.
The relay contact closure of pins 7 and 12 accomplishes two objectives.
Both the raise / lower and standby switches 60 require contact closure or depression to start timer clock 32.
Ethernet, RS232 and contact closure ports provide ample options for integration with any control system.
Relays are normally de-energized, contact closure is approximately 200 ms duration.
The contact closure of the SB1 and SB2 is.
Relays are normally de-energized, contact closure is approximately 200 mSec duration.
Force-On ” - allows an external contact closure to force its associated input to turn on.
The DPi1701 offers two relay contact closure outputs, and an isolated analog.
You'll also be interested in:
Examples of using Contact
Show more
I have little contact with the neighbours
Contact officer for national report if different
We can not contact the victim either
Examples of using Closure
Show more
Hull and closure strength and construction
Your job is to help facilitate that closure
Gap closure on accumulated excess nitrogen deposition
