Examples of 'contact faces' in a sentence
Meaning of "contact faces"
contact faces - the surfaces that come into contact or interact with each other
How to use "contact faces" in a sentence
Basic
Advanced
contact faces
Clean location and contact faces of the insert.
The same may be provided at further contact faces.
The inclining contact faces may be convex curved.
Distance between flange contact faces.
The contact faces must be placed directly on your skin.
An implant may include any number of contact faces.
Always grab the contact faces with both hands.
In this embodiment the evaporator has three useful contact faces.
Carefully clean the contact faces for the table.
This heating or arcing can cause welding together of the contact faces.
It has to be observed that all contact faces are bare and well conductive.
Conveniently the or each deformation tool includes one or more contact faces.
Such form of contact faces promotes self centering and holding capability.
These various blocks are in contact with one another via transverse contact faces.
Ground contact faces for secure positioning of the insert application from finishing to roughing.
See also
The same is possible for further contact faces between parts of the counter element.
Hold your hands calmly and avoid contractions and rubbing on the contact faces.
The two contact faces at the chest strap sensor may not be moist enough.
The light emitting assemblies are welded to the conductor contact faces of the two wires.
Inadequate stress on the two contact faces caused a large amount of loss during power transmission.
Accordingly, the load can be received by the whole contact faces.
Thus, contact faces that are as large as possible can be provided.
The plates have irregular surfaces on their contact faces that rub against each other.
Make sure the contact faces of flanges, of blade and the axle are clean.
Depositing glue on at least one of the contact faces of the two shells ; and.
Make sure the contact faces of flanges, blade and axle are clean.
Without such measure liquefaction will occur predominantly between the contact faces 8 and 9.
Make sure that the contact faces of the disc, the.
The contact faces are arranged around the corresponding axis and non-parallel thereto.
Cutting the winding around the assembly along lines where the mutual contact faces are joined ;.
The mold halves 5 have respective mutual contact faces 8 defining, in the closed position, a junction plane 9.
Figure 4 illustrates an alternative embodiment of the protrusions 6 and the contact faces 7.
Furthermore, the two contact faces F 41 and F 42 are located in the same plane.
Such non-connected parts of the counter element comprise further contact faces adapted to each other.
The lugs 135 also preferably have a fabric backing on their curved contact faces.
When bolting the cylinder head, clean throughly the contact faces and fit the head gasket.
It is, for example, adhesively bonded to the deformable ring 16 on their contact faces.
In order to prevent this, the side faces 8 and / or the contact faces 4, 5 have a rough structure.
The counter-weight, which can be disc-shaped, has two parallel contact faces 2A.
Front-to-front dimension (SR) Distance between flange contact faces.
You'll also be interested in:
Examples of using Faces
Show more
He would make ugly faces to make me laugh
Faces with the blood drained away
After wave faces of our friends shot
Examples of using Contact
Show more
I have little contact with the neighbours
Contact officer for national report if different
We can not contact the victim either
