Examples of 'contact tip' in a sentence
Meaning of "contact tip"
Contact tip usually refers to the part of a welding torch that comes into direct contact with the workpiece during welding. It is the small, replaceable component that allows the flow of electric current and transfers heat from the welding wire to the work surface
How to use "contact tip" in a sentence
Basic
Advanced
contact tip
Contact tip and gas nozzle installation a.
Remove gun nozzle and contact tip.
Remove existing contact tip by turning counterclockwise.
Check for damaged or incorrect contact tip.
Replace contact tip and gas nozzle.
Improperly sized or excessively worn contact tip.
Contact tip with wrong diameter.
Replace the nozzle and contact tip.
Contact tip replacement part for welding torch.
Wire burns back to contact tip.
The contact tip must always be firmly screwed.
Worn or wrong size contact tip.
Contact tip and wire diameter not matched.
Fit the new contact tip.
The contact tip on the torch is not damaged.
See also
Insert and tighten the desired contact tip.
Replace contact tip when the arc starts to become.
Use correct size contact tip.
Screw the contact tip back on so that the liner adheres to it.
Check for clogged cable liner or contact tip.
Remove gas nozzle and contact tip from end of gun.
The inventive system can comprise a contact tip.
Remove the contact tip and nozzle from the gun.
Insert and hand tighten desired contact tip.
Remove the contact tip of the torch to ensure smooth threading.
Cut the filler wire at the contact tip.
Screw in a new contact tip and tighten it with an appropriate tool.
Dirt can accumulate in the contact tip hole and.
A contact tip assembly is connected to the front end of the gooseneck.
Spatter bridge between contact tip and gas nozzle.
A contact tip assembly is mounted on the second end of the gooseneck.
Choose the correct size contact tip for the.
The contact tip transfers electrical current to the welding wire.
Remove the gas nozzle and the contact tip.
Remove the nozzle and contact tip from the welding torch.
Check for proper size cable liner and contact tip.
Dirt can accumulate in the contact tip hole and restrict wire.
The contact tip must always be firmly screwed onto the torch body.
Adjust the length according to the contact tip adapter.
The contact tip hole must be kept free of grime and oxidation rust.
This condition can be further increased as the contact tip wears.
Select a contact tip stamped with the same diameter as the wire being used.
Feed the wire to the gun contact tip and prepare to weld.
Remove stick electrode from holder or cut off welding wire at contact tip.
Remove the contact tip from the torch so that the end of the.
The wire keeps sticking in the contact tip and feeds very slowly.
Verify that contact tip is the proper size for the welding wire used.
Turn off the welder and install the contact tip and nozzle.
The contact tip may be partially formed of the refractory material reinforced copper composite.
Increase the voltage even higher and the contact tip will burn.
You'll also be interested in:
Examples of using Contact
Show more
I have little contact with the neighbours
Contact officer for national report if different
We can not contact the victim either
Examples of using Tip
Show more
People used to tip big in those days
Tip up and hold to tune more quickly
Just do not tip the table over
