Examples of 'contacts must' in a sentence
Meaning of "contacts must"
This phrase indicates a requirement or necessity for having connections or strong relationships with people in order to achieve or obtain something. It implies that having a network of contacts is essential or highly beneficial in certain situations, such as business or professional endeavors
How to use "contacts must" in a sentence
Basic
Advanced
contacts must
The battery contacts must be kept clean.
Contacts must be seen as sources of information.
The following telephone contacts must be counted as attempts.
Contacts must be separated with a comma.
The springs of these contacts must be pressed in fully.
Contacts must be knowledgeable on the contents of the application.
Your floor contacts must be intense.
Contacts must be soldered to the wire.
So someone on that list of contacts must know something about it.
The contacts must point downwards.
At least one responsible official and two contacts must be provided on the application.
Your contacts must be drying out.
Static electricity may damage them and contamination of the contacts must be avoided.
Used wear contacts must not be used.
The mechanical fixing of equipment fitted and the condition of electrical contacts must be examined.
See also
Contacts must be aligned with the contacts in the compartment.
The side with the contacts must face to the right.
The contacts must neither carry any voltage nor be connected with ground.
This lack of oxygen is also the reason why contacts must be removed before sleeping.
The pole contacts must then be replaced without fail.
At least two Responsible Officials and two Contacts must be listed on the application.
All contacts must be with.
The cutoff distance of the contacts must be at least 3 mm.
The battery contacts must be properly connected to the charging terminals.
First condition, complementary contacts must remain open.
The gold contacts must be kept on the back of the microSD.
If dirt and deposits are present, the charging contacts must be carefully cleaned.
All competitor contacts must have a clear and lawful purpose.
The unit ‘ s fuse must be triggered and the output contacts must open.
Angled contacts must be joined and anodised to ensure corrosion protection.
The gap between the contacts must be at least 3 mm.
Contacts must be protected using metal shadow masks or any other appropriate technique.
This means that the contacts must themselves have small dimensions.
If installing fuse holder without insulating boots, all exposed metal contacts must be properly insulated.
The charging contacts must not be touched with moist or metallic objects.
Open the battery compartment * The contacts must point to the.
Colored contacts must be taken care of in the same manner as regular contacts.
Different amateur radio stations each with a different call sign . All contacts must same country.
All their immediate contacts must be under surveillance for two weeks.
For . it domains, the registrant and administrative contacts must be the same.
The battery contacts must be lined up in the direction of the battery charger contacts.
The current to the relay contacts must be 5 A or less.
The other contacts must have been in the villages north and south of here.
The minimum distance between the circuit breaker contacts must be 3mm 0.1in.
The provincial contacts must never be left out of the loop during an incident.
Typically, perhaps a thousand contacts must be made to yield one agreement.
All contacts must be separated by a distance of at least 3 mm.
No fewer than 5 job contacts must be made every week.
His contacts must not be aware that he 's turned himself in.
Thus, the opening distance between the contacts must be sufficient to prevent arcs from re-striking.
