Examples of 'control head' in a sentence
Meaning of "control head"
Control head typically refers to the central unit or device that is used to manage and operate other components or systems. It can be found in various contexts, such as in electronics where it regulates the functions of a machine or in transportation where it governs the movement and direction of a vehicle
How to use "control head" in a sentence
Basic
Advanced
control head
Remove the control head cover screws.
Control head vibrates during normal operation.
Convertible valve with thermostatic control head.
Position the control head so the flexarm is level.
Overhead projector with vibration control head.
Connect the control head according to the table.
Can be combined with position feedback or control head.
Remove the control head upwards.
Insert chute control rod into chute control head.
Firmly grasp the control head or composite shaft.
The control head comprises a control assembly of the emergency stop device.
Finish securing chute control head to chute support.
The control head can now be installed as follows.
To adjust the control head height.
The control head can not be rotated contrary to the actuator.
See also
For which valves a control head can be interesting.
Gently push the tube into the bottom of the control head.
Slide the control head into the bracket.
Install pneumatic connection between control head and actuator.
Push the control head onto the actuator.
Lightning cracked a control head.
Inability to control head without support.
Install the gimbal knobs into each side of the control head.
Shows a control head of a lift vector.
Align the puck and the control head until.
Rotate the control head into the required position.
The actuator is topped off by the control head or positioner.
Adjusting the control head to the baudrate of the network.
Loosen the pneumatic connection between control head and actuator.
Turn the motor control head to the desired position.
Confirm that the power cable is disconnected from the control head.
Thermostatic control head for thermostatic and convertible radiator valves.
Firmly grasp the outer shaft or control head and hold it steady.
In this case the control head can be installed in a vertical position if necessary.
Loosen the pneumatic connection between the control head and the actuator.
Radio wave electronic control head for thermostatic or convertible radiator valves.
Two kinds of connections are used for the electrical bonding of the control head.
Ultrasonic control head for parts whose shape evolves during production.
Holding the sensor tube and twisting the control head can do this.
Briefly disconnect the control head from the supply voltage and reconnect or.
The specifications on the respective rating plate apply to the respective control head.
Finish securing chute control head by installing hex bolt and wing nut.
Insert the cable connectors into the correct ports on the control head.
Attach the control head to the actuator using the two side fastening screws.
Follow the instructions in this installation guide to gimbal mount the control head.
Any unauthorized reconstructions and changes to the control head are prohibited for safety reasons.
It incorporates two microprocessors that monitor critical parameters to report to the control head.
A safety switch including a control head rotatably linked to a casing that encloses an electrical contact assembly.
The sensor tube end should fit snugly into the bottom of the control head.
Unsnap the oil collector cover from the control head and discard the old gauze.
You'll also be interested in:
Examples of using Head
Show more
It turned my head around about electric cars
The way you hold your head
Only your head will come back
