Examples of 'control to position' in a sentence
Meaning of "control to position"
Control to position implies having the ability or authority to guide or direct someone or something to a specific location or situation
How to use "control to position" in a sentence
Basic
Advanced
control to position
Turn the valve selector control to position.
Set the steam control to position O and store the iron standing on its heel.
Unplug the appliance and set the steam control to position.
Set the steam control to position O and store the iron upright on its heel.
Remove the mains plug from the wall socket and set the steam control to position O.
Set the steam control to position.
Once the temperature indicator light shows steady, turn the rotary control to position.
Set the steam control to position O no steam.
Make sure the appliance is unplugged and set the steam control to position O.
Set the control to position Deodorize.
Empty the water tank and set the steam control to position O after use.
Set the steam control to position O and remove the plug from the.
Turn the boiling-time control to position.
Set the steam control to position 0, remove the plug from the wall socket and let.
Set the variable power control to position 2.
See also
Set the steam control to position q or w see chapter ' Using the appliance.
Always switch the appliance off by setting the speed control to position 0.
Set the speed control to position 1 to decrease the speed.
Empty the water tank and set the steam control to position 0 after use.
Set the steam control to position 0 and unplug the iron.
Once you have fi nished ironing, move the steam quantity control to position 0 and the.
Turn the boiling-time control to position ∙ Insert the plug into a suitable wall socket.
Switching off Set the slide control to position 0.
Move the steam control to position after approx . 1 minute.
To activate the Overdrive ( distorted sound ) mode, set the control to position OD.
C 2 Set the steam control to position O no steam.
Connect the lead of the electronic temperature control to position „ A2 “.
Turn the hotplate control to position 9 - where you will feel a.
Turn on the fan Switching on Set the slide control to position 1, 2 or 3.
Set the steam control to position 0, unplug the iron and let it cool down.
Ironing without steam 1 Set the steam control to position O no steam.
Set the steam control to position i or ; see chapter ‘ Using the appliance.
Then set the temperature control to position 2 or 3.
Set the steam control to position U see chapter ‘ Using the appliance ', section ‘ Steam ironing.
Set the variable steam control to position “No steam position”.
Turn the gas control to position “ Low ” and engine will stop running.
After use, turn the browning control to position " 0 " and remove the plug from the socket.
Turn the time control to position " Stay.
Slide the focus control to position 4 Concept Z4 only.
Set the steam control to position O fig . 2.
You'll also be interested in:
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
