Examples of 'control wiring' in a sentence
Meaning of "control wiring"
control wiring: Control wiring consists of electrical wires used to connect and control various components in a system or a piece of equipment. It is responsible for transmitting signals and commands to ensure proper functioning and coordination of the system
How to use "control wiring" in a sentence
Basic
Advanced
control wiring
Control wiring was reviewed using circuit diagram.
Remove grommet from control wiring hole in control box.
Control wiring use copper wire only.
Illustrates the effect of control wiring mounted in the track.
Control wiring between indoor units.
This will connect to the pump output control wiring.
Control wiring between indoor and outdoor units.
The buffer unit does not require any control wiring.
Knockout for control wiring and refrigerant piping.
The doorbell pushbutton is also connected to the doorbell transformer vÃa a control wiring.
For control wiring between indoor and outdoor.
Examples of only the most common types of control wiring have been provided below.
The control wiring is simplified thanks to the auxiliary unit.
Store the refrigerant piping line and control wiring line in the same line.
Control wiring is needed.
See also
Mounting on the return plenum is the easiest installation for the control wiring circuit.
Install control wiring and refrigerant piping within the same line.
Do not carry out this test on the control wiring ( low voltage circuit ) terminals.
Check that control wiring is isolated from power and motor wiring for noise immunity.
A dedicated ground wire is required for input power, motor power and control wiring.
Connect the lens control wiring to the three position terminal block.
If complete removal is desired, disconnect the ice thickness control wiring from the control board.
Reuse remote control wiring Reuse wiring when upgrading from a Daikin VRV system.
Power cable with ground wire . Keep proper distance between power cable and control wiring.
Main power supply and control wiring MUST be run in separate conduits.
Number Typical Capital Cost 1 Excavation for foundations and underground electrical collector and control wiring.
Power and control wiring for variable-speed motor.
Button station for open and close functions with type B2 control wiring standard for all operators.
Significantly more in control wiring elastic deformations of the non-linear nature.
Reuse indoor-outdoor wiring Restrictions: see remote control wiring.
In addition to the control wiring described above, power wiring is also necessary.
Check A-A or B-B contacts for proper operation and / or check control wiring to external load.
If required, combining lens control wiring and video coax within a common cable is acceptable.
OPEN and CLOSE button wiring connection reversed Check 3-button control wiring.
The shield wires of the central control wiring should be connected at closed end, and.
The control wiring consists of a standard LAN cable, greatly reducing the cost of installation.
The crossover wiring and central control wiring use 2-core non-polarity transmission wires.
Control wiring must be rated minimum 18 AWG.
Figure 2 illustrates a schematic electrical control wiring diagram for control of the refrigerant recovery unit 10.
All control wiring is 2-core and non-polarity wire.
Indoor-indoor / outdoor-indoor control wiring, Central control wiring.
Fix the control wiring with the clamp 9.
Field line connection, Control wiring and cool / heat selection.
Do not run low-voltage control wiring in the same conduit with high-voltage wiring.
You'll also be interested in:
Examples of using Wiring
Show more
Wiring is pulled trough column and base
Alterations of the wiring diagram are now allowed
Wiring should be carried out by qualified personnel
