Examples of 'controller sends' in a sentence
Meaning of "controller sends"
controller sends: Actions or commands issued by a controller device or system, typically in the context of technology or machinery where a central controller sends signals or instructions
How to use "controller sends" in a sentence
Basic
Advanced
controller sends
The controller sends a communication signal to a main control computer.
In each of them, the computer 's memory controller sends update commands to the DRAM chips.
The controller sends a write request to the selected disk.
Take for example this 4-20 mA loop where a controller sends a command signal to an I / P transducer,.
The controller sends that packet data to the radio module.
Accordingly, the detecting controller sends the signal to the abnormality-warning output unit.
The controller sends an output signal corresponding to the control difference to the actuator.
On this basis the radio network controller sends control message 504 to the user equipment.
The controller sends a write request command execution success message to the host.
In Step 407, the switch controller sends the call request to the host terminal.
The controller sends the data even if the touch is stationary and unchanging.
In Step 419, the switch controller sends the call ending message to the host terminal.
The controller sends a control message to the destination node by using the control channel.
The primary base station controller sends the message " trace invocation " 15 to the switching centre MSC2.
The controller sends a signal to open the valve when a programmed pressure has been reached.
See also
The network controller sends the handoff message to the effected entities.
The controller sends a command to the meter to request the date read by the meter.
The ATX and Headend controller sends a calibration parameter transaction throughout the cable system.
The controller sends the read request to an SSD.
Meanwhile, the first controller sends the switch-on instruction to the first switch circuit.
The system controller sends output data regarding the mentioned experience to the luminaire controllers.
A DMX controller sends DMX data to the connected DMX devices.
The Bus Controller sends one transmit command word to a Remote Terminal.
The first controller sends a switch-on command to the switch circuit.
The controller sends the data to the dual-mode base station.
The controller sends a signal to conveyor motor 14 to stop the movement of the conveyor.
Specifically, the controller sends voltage in waves to mimic the fluttering of a real insect 's wings.
The electronic controller sends a signal to open vent 38 when a programmed pressure has been reached.
Then, the controller sends a control signal to further rotate the motor in a normal direction.
A controller sends a trim / unmap command to an SSD.
The controller sends the request to the device, addressing it by the device 's UID.
The ATX and / or Headend controller sends an addressed calibration parameter transaction throughout the cable system.
The vehicle controller sends the impact detection signal to the actuator 16.
The controller sends a courtesy signature 2.5 seconds after you stop transmitting.
Next, the controller sends a signal to the motor that rotates the turret assembly 14.
The network controller sends a physical channel reconfiguration message 207 to the user equipment.
Then, this controller sends its system time to the device bus once every 24 hours.
The controller sends an INVITE to user A ( 1 ), with an offer containing no media streams.
The RNC controller sends a switch connection message ( DCH → CCH ) to the mobile station.
In step 301, a controller sends a third control instruction to a source board.
To do this, the controller sends an INVITE without SDP to the called party ( 13 ).
Thus, the controller sends a response as shown in Fig . 13 back to the relevant unit.
Step 902, The controller sends a switching request to one or multiple target ENs.
The card controller sends ( step 118 ) a random value RAND to the management module.
The controller sends a BYE with the status code 486 ( Busy Here ) in a Reason header field.
Now, the controller sends an INVITE without SDP to user B ( 5 ).
You'll also be interested in:
Examples of using Controller
Show more
The controller is then basically ready to use
Verify the temperature controller is functioning properly
The controller chafes after several hours
Examples of using Sends
Show more
He sends me a crate of sativa every other month
He apologises and sends you his regards
He sends over a selection of things each season
