Examples of 'conventional heat' in a sentence
Meaning of "conventional heat"
conventional heat: 'Conventional heat' generally refers to traditional methods or sources of heat generation that are commonly used or widely accepted. It is often contrasted with alternative or renewable sources of heat, such as solar, geothermal, or biomass. The term is typically used in discussions or contexts related to energy, heating systems, or environmental considerations, emphasizing the use of more traditional or conventional heat sources
How to use "conventional heat" in a sentence
Basic
Advanced
conventional heat
Conventional heat is more effective when broiling.
The films were formed by a conventional heat sealing process.
Any conventional heat source may be applied.
Heat pipes are an attractive alternative to conventional heat exchangers.
Use of conventional heat set ink on.
The sealed edges are formed by conventional heat sealing.
A conventional heat transfer fluid may be used therein.
The bacteria may be sterilized by conventional heat sterilization procedures.
Conventional heat sealing processes suffer from inefficiencies.
Cooling can be accomplished using conventional heat exchange equipment.
Any conventional heat exchanger can be applied here.
The composition obtained is then subjected to a conventional heat treatment.
Conventional heat source systems.
A comparable length of composite tape was subjected to a conventional heat treatment.
Cooling is done in a conventional heat exchanger and washing is done in a wash tower.
See also
This heat transfer may occur vÃa a conventional heat exchanger.
Conventional heat meters are not really suitable for cooling metering.
This has been accomplished in conventional heat lamination as well as through pleating.
Conventional heat treatments.
The hermetic seal may be formed by conventional heat sealing methods.
Conventional heat drying.
Sealing time is shorter than that of conventional heat sealing processes.
Conventional heat energy.
The heat welding is conveniently achieved by a conventional heat sealing technique.
Conventional heat exchanger has a bundle of tubes delimited by two end tubes.
It would be desirable to improve the efficiency of the conventional heat exchangers.
Use of conventional heat.
Rather than on the operator skills when compared to conventional heat presses.
One example of a conventional heat exchanger is the domestic wall mounted radiator.
The means for cooling may be any type of conventional heat exchanger.
Conventional heat and power production is combined with new types of plant components.
This second salt solution can be sterilized by using a conventional heat sterilization process.
The microstructure of a conventional heat treated grinding rod has a martensite surface and a pearlite core.
Then the open side could be heat sealed using conventional heat sealer.
For example, conventional heat and pressure may be used.
The heat exchange zone described here can be a recuperative or a conventional heat exchanger.
Concept optimization - conventional heat and power plants.
Conventional heat stabilizers include organic phosphates, trihydroxy butyrophenone or zinc salts of alkyl dithiocarbonate.
The rest of the waste heat can be removed by conventional heat exchange methods.
Alternately, a conventional heat transfer fluid may be used to transfer the heat.
The novel grinding rod microstructure disclosed herein was obtained using conventional heat treatment practice.
In commercial practice, conventional heat recovery practices will normally be utilized.
Figure 2 is an exploded drawing of a conventional heat sink.
For instance, conventional heat sealing bars may be used for this purpose.
UHPH is an emerging technology offering a potential alternative to conventional heat treatments for food sterilisation.
However, after such a conventional heat treatment the resonator properties degrade appreciably.
Figure 3 is an exploded drawing of another conventional heat sink.
Moreover, these types of conventional heat source can be expensive to acquire and operate.
Figure 2a shows the boundary layer in a conventional heat exchanger.
Similarly, conventional heat stabilizers such as the zinc salts of alkyl dithiocarbamates may be used.
You'll also be interested in:
Examples of using Heat
Show more
Use heat resistant plastic or wooden utensils
The room has a heat recovery system
Heat oils slowly on low or medium settings
Examples of using Conventional
Show more
Do not use conventional meat or candy thermometers
I turn now to the question of conventional weapons
Conventional wastes were disposed of or sent for recycling
