Examples of 'conventional metal' in a sentence
Meaning of "conventional metal"
conventional metal - describes a type of customary or traditional metal material, often used in contrast to alternative or modern metals
How to use "conventional metal" in a sentence
Basic
Advanced
conventional metal
This is not possible with a conventional metal.
A conventional metal zipper has a tab on its slider.
It was manufactured using conventional metal construction.
Most conventional metal detection equipment is capable of providing an immediate contamination alert.
Just like any other conventional metal sheet.
Conventional metal fabrication methods may be used to fabricate the rigid plates.
Many other conventional metal works.
This advantage is not offered by any conventional metal cage.
Expressence utilizes conventional metal fabrication and installation techniques.
Sollega proposed a cheaper alternative to the conventional metal mounting systems.
Half the weight of conventional metal string adjusters thus lower damping effects.
Hot gas joining is similar to conventional metal welding.
Conventional metal braces can also lead to the demineralization and decay of teeth.
Bored to tears by conventional metal arrangements.
Plastics have facilitated many advances compared to conventional metal parts.
See also
This may be done using conventional metal stamping and bending techniques.
Elastomeric materials are also desired to substitute for conventional metal parts.
The fluids differ in the conventional metal passivator present.
Conventional metal effect pigments are produced by treating metal granules with stamping machines.
Revision was then performed using a conventional metal booster wedge.
Conventional metal posts and ceramic posts tend to cause a roof fracture when they break.
They are normally constructed out of conventional metal fencing material.
Conventional metal matrix composite wires may exhibit secondary fractures after experiencing a primary failure.
Other catalysts may include conventional metal catalysts such as tin.
The targets were made from rubber rather than the conventional metal.
Machines designed for knitting conventional metal fibres such as stainless steel may be used.
Zazulyk begin a preliminary scan of the swamp with a conventional metal detector.
A conventional metal bellows pump recirculated the gas mixture through the reactor for three hours.
The element is smaller in size than conventional metal sheath heating elements.
Additional applications for controlled bonding include sealing of thermoplastic packaging replacing conventional metal foil seals.
Furthermore, conventional metal detectors are usually installed and baggages are searched.
This mix allows concrete elements to be manufactured without conventional metal reinforcement.
Unlike conventional metal detectors, which are generally limited to an average scanning depth.
This shrinkage causes problems in maintaining a conventional metal cap on a plastic bottle.
Consequently, the use of conventional metal fiber concretes without conventional passive reinforcement is limited.
The mini dental braces are of smaller dimensions than conventional metal brackes.
In addition, compared to a conventional metal target, the photomagnetism of the target was greatly reduced.
These materials produce longer fatigue life in service than do conventional metal components.
The conventional metal gasket described above suffers, however, form the following disadvantages.
Chain links molded from plastic are much lighter than conventional metal links.
In a conventional metal detector, the control box represents the central sub-assembly of the device.
Staples were shaped and pointed in a manner which is similar to conventional metal staple forming.
As to the requirement 2, conventional metal traps can cause a marked pressure loss after trapping particulates.
The RF pulses are not capable of penetrating the conventional metal stents.
Conventional metal traps basically satisfy the requirements 1 and 3.
GLARE parts are constructed and repaired using mostly conventional metal material techniques.
We will discuss problems of conventional metal traps in connection with the abovementioned requirements 1-5.
GLARE parts are constructed and repaired using mostly conventional metal working techniques.
Use of metal parts, e . g. conventional metal tools and feeding systems, in the microwave field.
CFRP provides a significant improvement in specific strength and stiffness over conventional metal alloys.
You'll also be interested in:
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
Examples of using Conventional
Show more
Do not use conventional meat or candy thermometers
I turn now to the question of conventional weapons
Conventional wastes were disposed of or sent for recycling
