Examples of 'cooled to below' in a sentence
Meaning of "cooled to below"
cooled to below - A phrase describing the process of reducing the temperature of something until it reaches a point that is lower than the specified level
How to use "cooled to below" in a sentence
Basic
Advanced
cooled to below
The reactor was cooled to below room temperature.
The resulting washing solution was mixed with the solution A and then cooled to below 10°C.
The shield can be cooled to below ambient temperature.
Was added and the reaction mixture was cooled to below 20 °C.
The effluent is cooled to below the water dew point.
The resulting white slurry was cooled to below 5 °C.
When cooled to below the gel point of the polymer solution, the polymer forms a gel.
The melted agar / agarose / mixture is then cooled to below the relevant melting point.
The solution is cooled to below reflux and 5.00 g of additional arzoxifene hydrochloride are added.
In some embodiments, the shield 50 is cooled to below ambient temperature.
Once it is cooled to below 2.2K it begins to exhibit quantum behavior.
The dried particulate material is cooled to below 30 degrees Celsius.
It is then cooled to below 24ºC, which allows fermentation to start.
After that selected duration, the reactor is cooled to below 10°C by immersing in crushed ice.
The mixture is cooled to below 60°C with stirring to solidify the dispersed polystyrene particles.
See also
We need to check that the temperature has cooled to below 30 degrees C.
The shield can be cooled to below about 60 degrees Fahrenheit.
The reaction mixture was then cooled to below 40°C.
The suspension is cooled to below 30 °C and the solid collected by filtration.
The whole column is then cooled to below 8°C.
The product was cooled to below 25°C immediately after each homogenisation cycle.
During stirring the cream is cooled to below 30°C.
The prepreg was cooled to below 10°C to allow recrystallisation of the epoxy resin.
The resultant solution was cooled to below 10 °C.
The emulsion is cooled to below 35°C with stirring and the preservative is added.
The resulting suspension was cooled to below 11 °C.
The powder was then cooled to below 30°C after which the pressure was slowly released.
The vacuum was removed and the reactor was cooled to below 60 °C.
The product obtained is cooled to below the gelling point of the solution.
The contents of the reactor were then cooled to below 50°C.
The shaped preform is then cooled to below the softening temperature of the binder.
After complexation is complete, the reaction mixture is cooled to below 25°C.
In these traps, the metal is cooled to below the soluble impurity saturation temperature.
The fragrance was added and the mixture cooled to below 30°C.
When the roller temperature has cooled to below 60 c, the rollers will stop automatically.
Gas cooled to below 90 ° C no longer sustains unwanted side reactions.
The resulting mixture was cooled to below 10 °C and stirred overnight.
Triphosgene is then added and the reaction mixture is cooled to below -15 °C.
The resulting solution was cooled to below 0°C in an ice / acetone bath.
After the post-catalysis was completed, the reactor was cooled to below 30°C.
The resulting solution was cooled to below 5°C and stirred for 2 hrs.
The sorbets were collected into suitable containers which had been cooled to below -20°C.
Then the reaction mixture was cooled to below 80°C before discharge.
The grapes cooled to below 10°C are said to be in the pre-fermentation maceration phase.
In some embodiments, the shield is cooled to below about 60 degrees Fahrenheit.
When it is cooled to below 30 °C, it is inoculated into the sterile room.
The pies are then cooled to below 8 °C.
The mixture was then cooled to below 30°C and the ashless detergent system was added.
The perfume was added when the cream had cooled to below 45°C.
The formulation was then cooled to below 30°C and stored for later use.
You'll also be interested in:
Examples of using Cooled
Show more
The air is then cooled down by evaporation
The cooled or conditioned goods have been unloaded
Clean the air cooled condenser fins
