Examples of 'cooling coil' in a sentence
Meaning of "cooling coil"
Cooling coil is a term used to describe a device or component of a cooling or refrigeration system that is responsible for removing heat from a substance or space. It typically consists of a coiled tube or pipe through which a cooling medium, such as refrigerant or chilled liquid, flows to absorb or dissipate heat
How to use "cooling coil" in a sentence
Basic
Advanced
cooling coil
Install the cooling coil on the bracket.
A large amount of ice builds up on the cooling coil.
A cooling coil is arranged in the reactor.
Fermenting vat with a cooling coil.
Dry cooling coil.
The reactor did not have a cooling coil present.
The cooling coil confines the solvent vapor to the beaker.
No air will blow out if the cooling coil is frozen.
Just like the cooling coil it too must be cleaned regularly.
The temperature is homogenized by means of a cooling coil in each reactor.
An internal cooling coil was used to control the temperature in each reactor.
The reaction temperature is regulated by the use of an external cooling coil.
Slide the ends of the cooling coil through the fastening boreholes.
The temperature of the liquid is kept constant by means of a cooling coil.
Heat is removed from each stage by a cooling coil installed in each reactor.
See also
In the summer season the evaporator acts as the cooling coil.
It is equipped with a stainless steel cooling coil and utilises a direct application system.
A stainless steel heat exchanger is recommended for systems utilizing a cooling coil.
A cooling coil in communication with the expansion chamber is positioned within the receptacle.
The heat of reaction of the exothermic polyoxyalkylation is removed by an internal cooling coil.
A cylindrical tube containing a cooling coil was mounted vertically on top of the reactor cylinder.
Heat is continuously removed from the reaction through an internal cooling coil.
It usually involved a cooling coil that was cooled by a compressor located within the unit.
An electrical heating jacket was mounted around the reactor and cooling coil.
A cooling coil connected to a temperature controller and a thermal sensor was used to regulate the temperature.
Interstage cooling can be accomplished by the use of a cooling coil or heat exchanger.
If the cooling coil of Fig.
Heat was continuously removed from the reaction through an internal cooling coil.
In some embodiments, a first cooling coil receives a stream of outside air.
At higher air flow rates the latent capacity of the cooling coil is reduced.
If the cooling coil is not completely covered with bath fluid, refill it.
Heat was continuously removed from the reaction through a cooling coil in the jacket.
A typical cooling coil in a refrigerated case is constructed of metal, such as copper or aluminum.
Continuously remove heat from the reaction mixture through the internal cooling coil.
In addition, an ethylene glycol cooling coil is placed within the beaker.
Solids were collected by filtering the solution and cleaning the reactor walls and cooling coil.
The fans draw environmental air through a refrigerated cooling coil heat exchanger into the room.
For example, a cooling coil may be submerged within the chemical treatment.
The cooling machine draws heat from the bath liquid via the cooling coil evaporator.
Then immediately place the cooling coil ( accessory ) into the centre of the vessel.
In the condenser, refrigerant vapour is condensed on the surface of the cooling coil.
For example, a heat exchanger may include a cooling coil positioned in a flow loop.
The receiver container is equipped with a water circulation, external cooling coil.
In some embodiments, the cooling coil can be separated from the burner / reformer assembly.
Cooling water and DX cooling coil.
When a refrigerant is used, the cooling coil is the evaporator in the vapor-compression refrigeration cycle.
In most cases a reheating coil needs to be installed ; possibly a cooling coil as well.
The cooling coil 40 is not designed to cool molten glass G at the heightened temperature.
Basically, distillation equipments are comprised of two containers connected by means of a cooling coil.
To cool the insulation 6 a cooling coil 7 is inserted therein.
You'll also be interested in:
Examples of using Cooling
Show more
The print head cooling system is activated
Cooling chamber for pigs and sheep
Damar had a cooling unit waiting for us
Examples of using Coil
Show more
Connect safety coil input to water supply
Coil the hoses and store as shown
Never sweep the search coil as if it were a pendulum
