Examples of 'cooling cycle' in a sentence
Meaning of "cooling cycle"
refers to the process or phase in a system where temperature is reduced or lowered to achieve a desired cooling effect
How to use "cooling cycle" in a sentence
Basic
Advanced
cooling cycle
And we are indeed heading into a cooling cycle.
The cooling cycle cools the combustion chamber.
Heater must go through cooling cycle.
The cooling cycle is based on the principle of reverse.
Do not unplug heater until cooling cycle is finished.
When a cooling cycle in boiler temperature alarm is activated.
Do not restart heater until cooling cycle is complete.
The cooling cycle serves to prevent this phenomenon.
Starting level three cooling cycle.
I effect of cooling cycle variable thickness.
We distribute products for the entire cooling cycle.
A cooling cycle or a dehumidification cycle is formed in this way.
The preservative is added during the cooling cycle.
Wait until cooling cycle is finished after stopping heater.
This was the second cooling cycle.
See also
The cooling cycle contains elements called heat exchangers.
Wait ten seconds after cooling cycle has completed.
The cooling cycle is identical to that used for calibration.
An operation in a case of operating a cooling cycle will be explained here.
The cooling cycle is necessary for the function to work properly.
This is a cooling cycle.
The motor will continue to run during the cooling cycle.
Secondary cooling cycle complete.
We are actually in a cooling cycle.
The above cooling cycle results in less distortion and residual stresses.
The indoor and outdoor units together constitute a cooling cycle.
The cooling cycle is necessary for the cleaning cycle to work properly.
The sintered part may then be cooled following an appropriate cooling cycle.
This cooling cycle will use some of the usual commercial gases.
The peak crystallization point was determined from the second cooling cycle.
Cooling cycle began after the resins had completely mixed to form chips.
The thermal properties of silicon enable a rapid heating and cooling cycle.
This cooling cycle repeats continually for as long as the cooling equipment is running.
Evaporator and condenser coils handle different sides of the cooling cycle.
The heating and cooling cycle turned out to be slow and energy consuming.
Pressure is maintained on the weld during the heating and cooling cycle.
The cooling cycle will take a few minutes before all other motors stops.
Expansion and contraction noises during the heating and cooling cycle are normal.
Transition from the cooling cycle to heating cycle is carried out by reversing the operation.
The term cycle relates of course to the heating cycle or to the cooling cycle.
The heat provided to the generator drives a cooling cycle that produces chilled water.
Seeking the lowest possible temperature for the start of the cooling cycle.
The coolant hereby follows the cooling cycle from point V to point W located in zone II.
The suffixes c and r denote transformations in the heating and cooling cycle respectively.
Thus, a cooling cycle is established as mentioned above.
The pressure remains constant during the heating or cooling cycle of these analyses.
When a cooling cycle finishes, the appliance 's refrigerated surfaces are defrosted automatically.
The cycle period is the minimum time in minutes between each heating or cooling cycle.
The thermal treatment comprises a heating cycle and a cooling cycle after the finish of the heating.
A number of physical properties of the array were measured throughout the heating and cooling cycle.
You'll also be interested in:
Examples of using Cycle
Show more
The cycle can be delayed up to nine hours
Press repeatedly to cycle through menu options
Cycle through different information display modes
Examples of using Cooling
Show more
The print head cooling system is activated
Cooling chamber for pigs and sheep
Damar had a cooling unit waiting for us
