Examples of 'cooling fins' in a sentence
Meaning of "cooling fins"
Cooling fins are protrusions or extended surfaces found on various objects, such as electronic devices, engines, or radiators, that are designed to increase the rate of heat transfer and improve cooling efficiency. Cooling fins are typically thin, blade-like structures that increase the surface area available for heat dissipation
How to use "cooling fins" in a sentence
Basic
Advanced
cooling fins
Clean the cooling fins on the cylinder.
With manure surface cooling fins.
Cooling fins are often disposed on a power module.
It features deep cooling fins on the ends.
The cooling fins should show signs of cooling.
Air inlet or cooling fins blocked.
Exhaust transfer units may include cooling fins.
Provide cooling fins when using on steam lines.
Clean engine cylinder cooling fins.
Clean the cooling fins and external surfaces as necessary.
Install original spark plug and cooling fins on engine.
The cooling fins are located on the inside of your refrigerator.
Never cover the cooling fins of the housing.
Cooling fins on the tank are provided to cool the tank.
Do not damage the cooling fins and tubes.
See also
This effect is reinforced by the presence of the cooling fins.
Remove debris from cooling fins and air passages.
Case for electric motor brushes comprising cooling fins.
Remove debris form cooling fins and air passages.
Heat generated by this compression is removed by the cooling fins.
Cleanthe engine cooling fins of grass and other debris.
To decrease the amount of ice that collects on the cooling fins.
The alternator cooling fins should also be cleaned periodically.
Internal rotor cooling fins.
Horizontal cooling fins are located at the top of the sidewalls.
Do not touch the hub or cooling fins when hot.
Clean the cooling fins of the cylinder and the housing.
The blocks were equipped with cooling fins on one surface.
Cooling fins and air passages under engine blower housing are blocked.
Clean the engine cooling fins of grass and other debris.
To decrease the amount of ice that forms on the cooling fins.
Never cover the cooling fins and keep a sufficient distance.
Remove debris from recoil starter cover and cooling fins.
The plate is provided with cooling fins on its outer face.
The outer surface of the stator preferably has cooling fins.
The plate is provided with cooling fins on its exterior surface.
The radiating surface área can be augmented with cooling fins.
Battery module including array of cooling fins having different thicknesses.
The cooling fins on both sides of the amplifier must never be covered.
Always keep air intake screen and cooling fins clean.
With cooling fins.
Under no circumstances should solid ice be forced off the cooling fins.
The cooling fins and the heat sink are formed as a single piece.
The ring was equipped with radial cooling fins on the internal surface.
Do not use high pressure as this will damage the cooling fins.
The first and the second cooling fins are continuous and straight.
The casing is generally equipped on its external surface with cooling fins.
An explosion proof enclosure with cooling fins is provided to increase cooling capacity.
Heatsink adapted to receive the optical module and including cooling fins.
The heat sink having cooling fins which are annular concentric rings.
You'll also be interested in:
Examples of using Cooling
Show more
The print head cooling system is activated
Cooling chamber for pigs and sheep
Damar had a cooling unit waiting for us
Examples of using Fins
Show more
Evaporator fins can harm your hand
Fins with a camber have an asymmetrical profile
Straighten the fins or replace the coil
