Examples of 'cords must' in a sentence
Meaning of "cords must"
cords must: This phrase is incomplete and it is not clear what it refers to. It might be a part of a sentence that emphasizes the necessity or obligation to have cords for something specific
How to use "cords must" in a sentence
Basic
Advanced
cords must
The cords must not be cleaned in an ultrasonic bath.
Plugs and couplings in power cords must at least have splash protection.
All cords must be suitable for outdoor use.
Also note that the speaker cords must be the same length.
Cords must be protected from damage.
All electrical cords must be secured to the floor.
The subvalvar apparatus is examined and the shortened secondary cords must be cut.
Extension cords must be suitable for outdoor use.
Exposed Electrical Parts Outer insulation on electrical cords must be intact.
The cords must not be caught or pulled too strongly.
Receptacles of extension cords must be splash-proof.
The power cords must be connected separately to a suitable socket.
Delay connectors for detonating cords must be reliably initiated;.
The cords must not cover up the area shown in.
Adapters, multiway strips and extension cords must not be used.
See also
Damaged cords must be replaced immediately by qualified personnel only.
Adapters, multi-way sockets and extension cords must not be used.
Long extension cords must meet the following requirements.
If cords must cross a traffic area, protect them with planks or other means.
Electrical extension cords must be 3-wire with ground.
Power cords must not rest on surfaces or floors that are subject to flooding.
Plug adapters or extension cords must also be equipped with a protective conductor.
Power cords must not come into contact with the cooktop.
The natural or synthetic textile cords must necessarily be maintained taut by pneumatic propulsion.
Power cords must not interfere with any adjustable base mechanisms.
Electrical cords must meet Fire Marshall standards.
The cords must not cover up the area shown in the figure.
In the oven, the cords must remain fixed in a single plane.
The cords must not cover the area shown in the figure below.
Extension cords must fit the following wire size guidelines.
The cords must not be immersed or disinfected using agents containing acetone, chlorine or bleach.
Damaged power cords must be replaced by a qualifi ed authorized service centre.
Your vocal cords must have fused during the transformation.
Extension cords must be properly sized to carry the electric load.
Power cords must not come into contact with any sources of heat or moisture.
Power cords must not come into contact with any sources of heat or damp.
Damaged plug or cords must be replaced by the manufacturer, service representative or qualified personnel.
The clip-on nylon cords must be secured around the legs of the bed for safety.
Any extension cords must be sized appropriately for the absorbed current I1.
Extension cords must be a 12 gauge cord at the smallest.
Extension cords must also be equipped with grounded ( three prong ) plugs.
Extension cords must have three wires and be rated for at least 15 amps.
All power cords must not show any damage, aging (for example porous wires) or sediments.
Any extension cords must comply with the requirements of the DIN VDE standard 0620.
