Examples of 'correct depth' in a sentence
Meaning of "correct depth"
correct depth ~ pertains to the accurate or appropriate measurement of the distance from a surface or point to a specified deeper point
How to use "correct depth" in a sentence
Basic
Advanced
correct depth
Finally set the correct depth position.
Adjusting the hemiplegic armrest to the correct depth.
Ordering the correct depth in each size is critical.
Adjust rear nuts for correct depth.
The correct depth depends on the rules of the country you live in.
Keep blade at the correct depth setting.
The incisions must be made at precisely the correct depth.
It is therefore an issue of correct depth of penetration of the cutting device.
Set the pot on rocks or bricks if necessary to achieve the correct depth.
Set the blade to the correct depth for the workpiece.
Bathymetric data should be processed as much as possible to represent the correct depth.
It installs the sleeve to the correct depth in the case without error or damage.
The blades will only be effective if they are set at a correct depth of cut.
Maintain the correct depth gauge setting!
Take soil sample to the correct depth.
See also
And the correct depth can be ensured by locks, in order to allow.
Sided hole of the correct depth.
My best advice when planting seeds is to plant them at the correct depth.
Optical sensors kits are factory set to the correct depth and tested for proper functionality.
This also ensures that the catheter is inserted at the correct depth.
It made no sense, because the correct depth was truly three feet.
It would roll down the wall and explode when it reached the correct depth.
Refer to Figure 9 for correct depth placement of fasteners in hardwood tongue.
Refer to the guide below for the correct depth setting.
The receiving space with the correct depth comes to lie opposite the receiving space 30c or 41.
The convertlon process requires that the oxygen jet penetrates te the correct depth.
This tool will install each bushing to the correct depth for the best oil control.
The second set of linkages 128 inserts the product into the collets to the correct depth.
Fig . J illustrates the correct depth for the screw to be driven.
Next, set the planting machine to the correct depth.
For nutsetting, always use the correct depth locator e.
When planting bulbs, make sure they go at the correct depth.
Refer to the guide below for the correct depth setting Fig . 8.
The 8mm collet has a flange coller to ensure insertion to correct depth.
Move the shoe ( f ) to obtain the correct depth of cut.
Now we just simply release some ballast . until we reach the correct depth.
Connect tool to air supply, and drive nails to check for correct depth of drive.
For instance, many of the cables have not been dug in to the correct depth.
Move the shoe ( 6 ) to obtain the correct depth of.
The infusion tube 17 has been inserted to the correct depth.
A depth guide ( 70 ) can be positioned on the shaft to ensure correct depth of placement.
You'll also be interested in:
Examples of using Correct
Show more
The correct presser foot is not being used
Information for the correct disposal of electrical
Correct extraction under extraction over extraction
Examples of using Depth
Show more
A small amount of depth of cut can be obtained by
Depth measurement also includes door handle
Reassemble the depth guide and reattach
