Examples of 'correct signal' in a sentence
Meaning of "correct signal"
correct signal: This phrase refers to sending the right message or indication
How to use "correct signal" in a sentence
Basic
Advanced
correct signal
The boy makes the correct signal.
Use the correct signal cables for each source.
Can not locate correct signal.
Select the correct signal sources for crossfading with the assignment switches.
Connection and obtain the correct signal cable.
If the correct signal isn't sent… the satellite would automatically destroy their planet.
Set the selector switch to the correct signal source.
For a correct signal reception, both transmitter and receiver must use the same frequency.
This is an important and correct signal to the candidate countries.
The clock enters into the running mode of receiving the correct signal.
Router to deliver the correct signal to the appropriate amplifier.
Dimerization of the hGHR appears essential for correct signal delivery.
Search for the correct signal see chapter ‘ Using the appliance.
The conjugate was therefore titrated in the plate to obtain a correct signal for the test.
It seems to be the correct signal for me, Astronaut James.
See also
The receiver end requires a wavelength filter so that the correct signal can be extracted.
Check that the correct signal source has been selected, e.g. internal microphone M position.
Controls of the cooling circuit pump do not obtain correct signal according to set function.
First, select the correct signal source Air, StD, HRC, or IRC.
The Delegation felt that would be a correct signal.
Only in this way would the correct signal be given to the users.
Bit ITCR to indicate reception of a correct signal unit.
Bit ITCR to indicate reception of a correct signal unit . bits not used.
It became a sad day because the Council failed to send the correct signal to Israel.
Line / Mic Switch - This switch will set the correct signal level at the Audio Output jack.
W3 corresponding to the timing pulse received correct signal CRBR.
Economists said Hollande 's reforms were sending the correct signal but may not be enough.
Using other devices on the same signal frequency ( 868MHz ) could prevent correct signal transmission.
In submenu Aoux, Check and if necessary set the correct signal type current / voltage output.
One's own body will give a correct signal.
Occasionally rotary phones skip " clicks " and will not send the correct signal for certain numbers.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Correct
Show more
The correct presser foot is not being used
Information for the correct disposal of electrical
Correct extraction under extraction over extraction
