Examples of 'correlation value' in a sentence
Meaning of "correlation value"
Correlation Value: The degree or strength of a relationship between two or more variables, often measured statistically
How to use "correlation value" in a sentence
Basic
Advanced
correlation value
This will give a first correlation value.
A high correlation value indicates high amount of symmetry.
Only the real part of the correlation value is computed.
A lower correlation value generally indicates a better match.
A decision variable is the magnitude measure of the corresponding correlation value.
A large correlation value may be detected in misaligned frequency.
The position difference for which the correlation value is a maximum is adopted.
The correlation value indicates that the tool is reliable.
The pair of images for which the correlation value is maximized is selected.
This correlation value is similar to that obtained in our other studies.
A detailed method for calculating the correlation value will hereinafter be described.
The presence of noise will cause error in the cross correlation value.
A negative correlation value indicates the opposite behavior.
A trace may be produced which is a plot of the correlation value as a function of time.
This gives a correlation value to the current set of samples.
See also
Selection circuitry within each data receiver then selects the most likely correlation value.
This generates a correlation value for each tested delay.
From this we can predict the probability that a particular peak correlation value occurred randomly.
If the coefficient of correlation value is close to zero there is no linear connection.
Where Tpeak is the coarse estimate of the location of the peak correlation value.
Determining a correlation value may take the readout of several frames.
The process of detecting the peak position of the correlation value Y calculates AY.
A zero correlation value indicates the received symbol is orthogonal to the respective signature symbol.
Method and receiver apparatus for determining a correlation value considering frequency correction.
The said correlation value is compared to a threshold value ; and.
Packet detection is only assumed if the correlation value above the defined threshold.
If the correlation value is over a defined threshold, a new packet is detected.
This then leads to an increase in the peak correlation value associated with these peaks.
A correlation value of 0 means that there is no relationship between the two distributions.
This threshold value represents the minimum allowable correlation value which would represent a detected timeslot.
The correlation value y is applied to a comparator 23 for comparison with a threshold value ythr.
This threshold value represents the minimum allowable correlation value which would represent a detected time slot.
This generates, for each hypothesized secondary synchronization code location, a correlation value.
The resulting cross correlation value has a peak value for a specified timing part.
This will cost another 3 bits per correlation value.
After that, the correlation value is computed.
Signals that are not related to the reference waveform result in a correlation value of 0.
Comparing said correlation value to a threshold value ; and.
For a plurality of channel combination ( m, n ) the defined correlation coefficient or correlation value c is calculated.
On the other hand, a correlation value in an expected detection range decreases.
For each correlation function, a filter having the maximum correlation value is searched.
Determining that the highest correlation value exceeds a first predetermined threshold value ;.
In this case, when the scramble code matches, a greater correlation value can be obtained.
Determining the correlation value of the sign bit and a predetermined reference signal ;.
The device of claim 1, wherein the parameter value is a correlation value resulting from said matching.
This cut-off correlation value may be applied to the correlations between experimental profiles.
These delay difference calculation means 8 determine the value of k having the largest correlation value.
In this case, the correlation value is between the value zero and the maximum value.
Incidentally, when there is no reference data g, the calculated correlation value Y is zero.
However, other embodiments may use a correlation value calculated for another one of the early reflections.
You'll also be interested in:
Examples of using Value
Show more
Adjustments of value are recognized in the income statement
Promoting and reinforcing local value systems
Farms and market value of agricultural products
Examples of using Correlation
Show more
Weak correlation between poverty and unemployment
It also examined the correlation between methods
But correlation is not the same as causation
