Examples of 'corresponding holes' in a sentence
Meaning of "corresponding holes"
This phrase likely refers to matching or equivalent openings or gaps that align with each other
How to use "corresponding holes" in a sentence
Basic
Advanced
corresponding holes
The corresponding holes are also called pinholes.
Mount two fuse holders in the corresponding holes.
Gecko into the corresponding holes in the ceiling.
You just want to put them on the corresponding holes.
No corresponding holes in her dress.
Align holes in cordwrap with corresponding holes in rear handle.
Designed with vibrant colors and textured pieces to fit in the corresponding holes.
Align holes in cordwrap with corresponding holes in front handle.
On one side of the gear wheel axis there is a small bushing with corresponding holes.
Insert the wires to the corresponding holes and tighten the connector screw.
Raise glass shade in order to guide pull chains through corresponding holes.
Align trim kit frame studs with corresponding holes in mounting rails and snap into place.
Column base and insert the screws into the corresponding holes.
With the corresponding holes in the board refer to fig . E.
Advantageously the protruding parts and the corresponding holes are cylindrical.
See also
Corresponding holes ( concealed ) are arranged in the tool.
Insert the two screws into the corresponding holes in the holder.
Removelevelling foot and corner screw from cabinet base and transfer to corresponding holes.
Corresponding holes will be drilled to allow these screws to go into cover 53.
Insert the three screws into the corresponding holes in the holder.
Corresponding holes 12 are also formed in the lower bus bar 7.
Check if all wires are correctly inserted in their corresponding holes in the terminal block.
Passing the secondary current cables phase per phase through the corresponding holes.
The distance between the corresponding holes of each pair was about 4-5 mm.
In another advantageous embodiment the protruding parts and the corresponding holes are cylindrical.
The latter may comprise corresponding holes 14 to accommodate screws 13.
The rapid prototyping method can simultaneously produce the rods and corresponding holes.
Engage the locating pins [ 3 ] in the corresponding holes on the adjustable supports.
In some embodiments, the bolts thread directly into the corresponding holes.
The threaded rods 13 pass through corresponding holes made in the thrust pieces 4.
Due to the roll forming, the projections may be introduced into corresponding holes.
The pin needs to extend through corresponding holes 18 in the ball valve element.
Fix the Cupularve with 2 woodenscrews in the corresponding holes.
These posts are received in corresponding holes in arm assembly 60 and / or column body 51.
The rivets pass through the holes in the bracket and corresponding holes in the card.
These posts are received in corresponding holes in column body 51 and / or support pad 23.
Reinstall burner cover, aligning holes in cover to corresponding holes on burner.
This flange 34 comprises corresponding holes 35 for the insertion of the fastening bolts.
Insert the ends of the lower handle into the corresponding holes in the mower.
Bolts 85 are positioned through corresponding holes 92 in sleeve 84 generally equally spaced apart in a ring-like fashion.
The arrangement of the positioning pins and the corresponding holes may be reversed.
Correspondingly, building element 401 comprises a bottom surface ( not shown ) with corresponding holes.
The pins 4, generally of steel, are forced into corresponding holes provided in the brackets 3.
For 70 and 200 inch screens, remove the adjustment screws and insert them into the corresponding holes.
The screws 13 are attached in corresponding holes in the cover 2.
Align the sides of the assembled Front / Rear Guards with the corresponding holes on the.
In the side tube 40 that align with corresponding holes in the inner side plates 115.
During mounting, the studs 20 are inserted into the corresponding holes.
Align the holes on the chute deflector with the corresponding holes on the deck surface.
These are then connected to the base by inserting the pins 79 into the corresponding holes 76.
You'll also be interested in:
Examples of using Holes
Show more
Great holes have been cut in the earth
Always remove the lid or put holes in it
They cut holes behind every cabinet
Examples of using Corresponding
Show more
Number of juveniles corresponding to cases by type of decision
Corresponding patents granted or pending in other countries
Gradation diagram corresponding to the gamma curve
