Examples of 'corrugation' in a sentence
Meaning of "corrugation"
Corrugation is the process of shaping a material into parallel ridges and grooves to increase its strength or flexibility, commonly seen in cardboard or metal sheets
Show more definitions
- The process of corrugating; contraction into wrinkles or alternate ridges and grooves.
- washboarding (the appearance of ripples or bumps on a dirt or gravel road)
How to use "corrugation" in a sentence
Basic
Advanced
corrugation
The corrugation lines are formed in relief by pressing.
The road is subject to washaways and corrugation.
A corrugation device for sheets of paper material.
Optimizing design for economy corrugation pattern.
Corrugation works well for removing material.
This enables the corrugation process to be continuous.
The glue is applied to tips of the corrugation.
A very well known corrugation face is corrugated iron.
This ratio is referred to as the corrugation ratio.
The corrugation is only shown as a simple circular corrugation.
The point where the corrugation begins.
The corrugation runs at an angle across the strip.
It may be smooth on its surface or have a corrugation.
Bad thing is the corrugation is terrible.
The corrugation control portion is preferably a taper surface.
See also
An alternative embodiment of a corrugation device comprises two cylinders.
Rail corrugation is frequently the subject of community noise complaints.
In a particular embodiment the corrugation will consist of a waveform.
Corrugation produced at end portions of the recording material was evaluated.
You need one less corrugation.
The corrugation pattern can serve at least two functions.
Many materials today undergo the corrugation process.
Presence of corrugation or perforation.
We are going to have to make sure that the corrugation is pounded out.
Corrugation and consolidation are thereby integrated into the manufacturing process.
The grooves can have different corrugation patterns.
Their corrugation longitudinal direction runs perpendicular to the plane of the board.
This may result in a perceptible corrugation of the surface.
Each loop or corrugation includes a pair of angled legs joined to a pad portion.
This base had a coaxial corrugation and drain holes.
The profile of the sheet is a regular substantially sinusoidal corrugation.
And check the laminate for corrugation or penetrated moisture.
To protect the wires under the ceiling is used corrugation.
Push the cover at the corrugation towards the wall bracket.
It is preferred that the undulation of the inner surface comprises corrugation.
Alternative shapes of triangular or rectangular corrugation are also useful practically.
Sinusoidal corrugations may be suitable or a variety of shapes of corrugation may also be useful.
In one embodiment a single start spiral corrugation may be formed.
The corrugation is arranged to extend horizontally parallel to the floor of the container.
The siphon is connected to the corrugation with an additional conical gasket.
It also enables better control of pressure during the corrugation step.
Sheets are arranged such that the corrugation direction of adjacent sheets is reversed.
Such corrugation may further reinforce the structure for added support.
There also appeared significant surface corrugation on the larger crystals.
Corrugation is required to protect against damage and provide access in any time.
This choke boundary region may be referred to as a corrugation or corrugation region.
Today the corrugation process is carried out using the process of roll forming.
One to each corrugation.
This slippage also causes noise and surface damage called corrugation.
The second and third corrugation patterns differ from each other.
