Examples of 'countersink' in a sentence
Meaning of "countersink"
The verb 'countersink' means to enlarge the top of a hole in such a way that a screw, nail, or bolt will lie flush with or below the surface
Show more definitions
- a cylindrical recess, typically machined around a hole to admit a screw so that it sits flush with a surface.
- To create such a conical recess.
- To cause to sink even with or below the surface.
How to use "countersink" in a sentence
Basic
Advanced
countersink
Countersink screws into the backer panel.
The unit can also be used to countersink.
A countersink is formed inside the side walls.
I have a punch that is used to countersink nails.
A countersink is formed at one end of the opening.
Check depth of drive adjustment for proper countersink.
Countersink bit for mounting on fiberglass.
Away from magazine for less countersink or flush.
Countersink same diameter as screw head.
Just make sure to countersink and fill the holes.
Countersink the drilled holes on the front side of.
Air pressure must be adjusted to properly countersink the staples.
Adjust the countersink by turning the depth adjustment thumbwheel.
Ship plate countersink.
Countersink the heads to prevent interference with the hood.
See also
This cap is received in a countersink provided in the thickness of the element.
Countersink the screws into the holes in the cupboard.
Method and apparatus for producing container body end countersink.
Countersink for countersunk screws.
The head and cap are received into a countersink hole in skin.
Countersink for countersunk rivets.
The depth of drive adjustment thumbwheel allows fine tuning of the countersink.
The countersink is provided in the can end to improve strength.
Always use a hammer and punch to countersink all nails before sanding floors.
I countersink your boat.
Always use a hammer and punch to countersink all nails before sanding fl oors.
Countersink on top side.
Test drive one screw before finalizing the depth to ensure appropriate countersink.
Fully countersink the inside edge of one end for each.
The collar has external threads which engage complimentary threads in the countersink.
Drill and countersink the holes on the front of the support board.
Such control mitigates gaps between a head of a rivet and a countersink into which it is deformed.
Countersink on underside.
In this embodiment, a first countersink is formed in the inferior vertebrae.
Countersink planks for recessing of the washer and the lag bolt head.
The cutting tool may be a drill, reamer, countersink or any combination of these.
The countersink dresses the bone in a smooth circular fashion to promote a sealing fit.
The circular bore portion 88b can include a countersink or alternatively include a counterbore.
Use of countersink technique produces landing pads for sub to sub ink joints.
Figure 1 is a side view of a device according to the invention for checking countersink dimensions ;.
The production of a countersink to recess this seal in the support is also avoided.
A chuckwall is also formed, which extends radially outward from the annular countersink.
The support has a countersink or beveled surface around the lancet opening.
Accessories for this tool, including drill and countersink bits, wire cup brushes.
The matching of the countersink bore and the head prevents contamination or leakage therebetween.
Then, extending radially outward from said angled inner wall is an annular countersink portion.
Use countersink with indexable inserts that always have a grade number ending in H.
Stiffness is also provided to the beverage can end by the anti-peaking or countersink bead.
However, a further countersink or counterbore may provide the widened mouth.
The pumping chamber uses a pair of electrodes, one of the electrodes may contain a countersink.
