Examples of 'countersunk' in a sentence
Meaning of "countersunk"
Countersink (verb) - To drill a hole with a conical recess to allow the head of a screw to lie flush with or below the surface
Show more definitions
- past participle of countersink
- That has a flat conical top allowing it to be inserted flush with a surface
How to use "countersunk" in a sentence
Basic
Advanced
countersunk
Screw in countersunk and socket head screw.
I want every screw and joint countersunk.
Presence of countersunk hole for easy use.
Remove locking varnish from countersunk screw.
Countersunk square neck bolt for woodwork.
The plate may be countersunk to provide concavity.
Countersunk nibbed bolt for woodwork.
Screw heads must be countersunk into the panel.
Countersunk holes are drilled for the spoke nipples.
Do not use a countersunk screw head.
Shows an embodiment of an air valve with a countersunk collar.
Flat countersunk head wood screws.
Mounting link with hole for countersunk screw.
Also include countersunk hardware and cover gasket.
It is not recommended to use countersunk screws.
See also
Do not use countersunk screws when mounting the midspan.
Connecting screw flat countersunk head.
Raised countersunk head screw.
In police uniforms through countersunk hole.
This is a countersunk head device.
Remove the table access plate by removing the countersunk.
The screws should be countersunk so that they are below flush.
A countersunk interfaz is also located between a washer and nut.
Raised headed countersunk rivet.
Cavity is countersunk as described above for magnet to sit therein.
Countersink for countersunk screws.
Countersunk headed bolt.
Countersink for countersunk rivets.
Countersunk neodymium magnets.
Face the surface with the countersunk holes upward.
Countersunk or flanged.
Apply thin cyano to the countersunk areas to harden the wood.
Open up the holes on the underside to accept the countersunk screws.
Do not use any countersunk screws to fix the gear box.
Thicker countertops may require the countertop be countersunk from below.
Plain countersunk screw.
To mount the device on a wall or ceiling using countersunk head screws.
Flush countersunk rivet.
The helicopter deck is normally provided with countersunk anchor points.
Such an aperture may be countersunk at the top intermediate side thereof.
The screw head can be configured in the shape of a countersunk head.
Using screws with countersunk heads can damage the mounting bracket.
Attached the appliance to the wall with two countersunk head screws.
Secure all knife countersunk screws using high resistance thread glue.
Be sure all screw heads are positioned in the matching countersunk slots in shoe.
Said countersunk head screw is located at the end of a longitudinal tie member.
The nipple is screwed in and is countersunk to provide a neat and aesthetic finish.
The screwed studs may bear on the flange through a countersunk collar.
The head was countersunk into the plank and puttied over to protect it.
The thread of the collet chuck nut is countersunk in the machine housing.
