Examples of 'cover panel' in a sentence
Meaning of "cover panel"
A cover panel refers to a protective or decorative covering that is placed over a panel, typically to conceal or enhance its appearance. It is commonly used in furniture manufacturing or interior design to hide the underlying structure or provide a finished look
How to use "cover panel" in a sentence
Basic
Advanced
cover panel
Lower cover panel combustible material allowed.
Replace each screw in the cover panel.
Cover panel position for ductless conversion.
Be sure to close the cover panel when finished.
Slide cover panel back onto posts on dispenser.
Check by removing the cover panel.
Front cover panel remove for ductless conversion.
Adaptive architectural cover panel system.
Cover panel conceals power cable and air vents.
The plastic of the cover panel is typically not transparent.
Press up on the front corners of the filter cover panel.
Remove the cover panel on the filling and draining connection.
Securely install the outdoor unit terminal cover panel.
Cover panel on.
Install bracket and place lower cover panel if used.
See also
Each cover panel is supported by two swinging arms forming a deformable parallelogram.
The upper panels are hooked into the cover panel.
Cover panel for a display and mobile terminal having the same.
Install the air filter and close the cover panel.
The cover panel is hinged about the far end of the tray.
A fan blade is covered by a generally plain cover panel of substantially rigid construction.
The lateral and rear panels are hooked into the cover panel.
Each cover panel is pulled over the water and is floated into position.
Remove the four nuts that retain the steel cover panel.
Opening the cover panel provides access to the contents within the container.
Neither need the pattern of projections extend over the whole of the cover panel.
Remove the cover panel from the bay that will hold the drive.
Unplug the control panel before you lift off the right cover panel completely.
Gently slide the cover panel with the battery tray out of the case.
Loosen and remove the four screws A from the cover panel.
This cover panel of the motor vehicle can for example be made from plastic.
A similar opening near the free end of the cover panel also receives the latch extension.
A cover panel for covering the base panel is mounted pivotably on the base panel.
Read MoreQuick View aluminium cover panel exterior by cnc machining.
The cover panel is detachably secured to the lowermost tray along lines of adhesive material.
Remove the screws in the lower cover panel of the Liberty.
Remove the cover panel on the lower front part of the washing machine see figure.
Optionally, the mounting plate forms a battery cover panel.
Gluing a first prefolded cover panel part and folding the same once is performed.
Secure all connections, tighten strain relief and reinstall cover panel.
Gluing a second prefolded cover panel part and folding the same once is performed.
Now screw the axis to the left side of the cover panel 6.
Remove the cover panel on the lower front part of the washing machine see overleaf.
The basketball includes a bladder, a carcass and at least one cover panel.
Remove the cover panel on the lower front part of the washer dryer see overleaf.
If so, remove the protective films and fix the cover panel onto the fitting.
Place the cover panel over the wall support panel and secure with Torx screws provided.
The three-pole connection cable for the insertion module is fastened to the cover panel.
The cover panel is marked SRS AIRBAG.
The basketball includes a bladder, a carcass covering the bladder, and at least one cover panel.
You'll also be interested in:
Examples of using Cover
Show more
Remove the battery cover by sliding it downward
Cover and keep warm up to one hour
Unscrew the bulb cover by turning anticlockwise
Examples of using Panel
Show more
Center the panel on the freezer door
Panel discussion on agriculture and rural development
Replace the panel by reversing this step
