Examples of 'cracking can' in a sentence
Meaning of "cracking can"
Cracking can: Refers to the sound of cracking or snapping of a can. This phrase is commonly used when talking about opening a can of drink or food
How to use "cracking can" in a sentence
Basic
Advanced
cracking can
Cracking can be reduced by increasing decompression time.
While solidification cracking can occur in almost any.
Cracking can render the cut piece commercially useless.
Aircraft without indications of cracking can resume normal flying.
Hot cracking can be prevented by.
Under drought conditions, berry cracking can occur.
In some situations cracking can be tolerated up to a maximum length of crack.
If proper finishing materials are not used, cracking can occur.
A localized cracking can begin.
Cracking can allow moisture to penetrate and corrode the reinforcement.
Both isomerisation and cracking can improve cold flow properties.
The cracking can cause sudden and unexpected failures in the brake cables.
As a result, oxidation and cracking can occur in the platforms.
Ozone cracking can occur in many elastomers for example used in pneumatic systems.
Thus, occurrence of strain or quench cracking can be sufficiently suppressed.
See also
Additional cracking can create the lighter hydrocarbons used in gasoline.
As the steel cools, or when it is straightened cracking can occur.
Flatting and cracking can be replaced by shellac and gum arabic.
Therefore, reliability against the solder cracking can be improved.
A plant for steam cracking can have one or more such cracking furnaces.
This is the dangerous consequence of bulging, since transverse cracking can occur.
The presence of stress corrosion cracking can diminish the structural integrity of the core shroud.
Furthermore, if internal stresses persist in the welds, cracking can occur in the seal.
Stress cracking can be reduced by sulfonating the bulk thermoplastic after formation into a final article.
Through extensive analysis, this cracking can be attributed to a variety of factors.
WEP cracking can easily be demonstrated using tools such as Air crack.
Although it is quite common, neck cracking can also be harmful when not done correctly.
The catalytic composition thus prepared and used for cracking can contain,.
Buttress or multiple arch dams Cracking can occur where relative displacements are obstructed.
Fiber breakage is essentially non-existent, and no surface cracking can be seen.
Thus, thermal cracking can be a problem in the disengaging vessel.
The reactor for fluidized-bed catalytic cracking can operate with ascending flow or descending flow.
Indeed, cracking can be avoided by introducing joints at the right spots.
Thus, efficiency of thermal cracking can be compared to other gas treatment processes.
Flex cracking can occur during shipping and handling of even small fluid-containing pouches.
An increased resistance to delayed cracking can be obtained by limiting the manganese content to 3 %.
Corrosion and cracking can both damage cladding, but they are fundamentally different phenomena.
As a result, cracking can be heard.
This cracking can happen on day one!
Also, in this process, hot cracking can be aggravated by a poor weld shape.
Neck Pain - Neck cracking can decrease the movement of the neck after a long time.
Pressure corrosion cracking can occur above 60°C.
In extreme cases, stress cracking can lead to leakage of the contents from the container.
