Examples of 'crank cap' in a sentence
Meaning of "crank cap"
crank cap: This phrase could refer to the decorative or protective cap covering the crankshaft opening on a piece of machinery or equipment, providing a finished look or protection to the crank mechanism
How to use "crank cap" in a sentence
Basic
Advanced
crank cap
Do not tighten the crank cap excessively.
Remove the crank cap by loosening the screws with a screwdriver.
Loosen the six screws and remove the crank cap.
Remove the crank cap using a socket wrench.
Loosen the six screws with a screwdriver and remove the crank cap.
Remove the crank cap using a hex wrench.
Adjusting dial i Screwdriver o Rear cover p Screws a Brush holder cap s Socket wrench d Crank cap f Hammer grease.
Remove the crank cap cover.
Each crank cap 33 supports the crankshaft 5 together with the corresponding partition wall 32.
Always remove the crank cap only after aligning.
Remove the crank cap using a Makita lock nut wrench optional accessory.
Loosen three hex bolts which secure the crank cap cover and remove the crank cap.
Reinstall the crank cap and tighten hex bolts firmly with the hex wrench.
Loosen the five screws on crank cap and remove the crank cap.
Pull out the crank cap in the direction of arrow and remove it.
See also
Do not tighten the crank cap excessively when installing.
Remove the crank cap by loosening hex bolts ( 3 pcs . ) securing it with a hex wrench.
Loosen the four screws on crank cap and remove the crank cap cover.
Remove the crank cap using a hex wrench, then replenish with fresh grease 60 g.
Loosen the two screws on crank cap cover and remove the crank cap cover.
Reinstall the crank cap and tighten with the screwdriver.
Remove the crank cap cover . Fig.
Reinstall the crank cap and tighten with the hex wrench.
Reinstall the crank cap securely with the hex wrench.
Reinstall the crank cap and secure with the screws.
Reinstall the crank cap and tighten with the lock nut wrench.
Always remove the crank cap only after aligning the change lever with the symbol.
Remove the crank cap using a hex wrench, then.
Remove the crank cap using a socket wrench . Fig.
Remove the crank cap using a hex wrench . Fig.
Reinstall the crank cap and tighten with the socket wrench . Fig . 14.
