Examples of 'crazing' in a sentence
Meaning of "crazing"
craze (verb) - to become very enthusiastic or excited about something for a short period of time
Show more definitions
- present participle of craze
- A covering of fine cracks on a hard smooth surface such as a glazed object or car exterior.
How to use "crazing" in a sentence
Basic
Advanced
crazing
To avoid crazing preferred polyesters are typically amorphous.
The pieces do not ping because of crazing.
Crazing is a glaze defect of glazed pottery.
This amount of stress does not promote crazing.
Crazing in the melted glass suggests a liquid accelerant.
Some light crazing on some of them.
Crazing could be easily detected under a light microscope.
This amount of stress is very prone to cause crazing.
Crazing in line with its age.
To remove stains from crazing you.
Crazing is a normal occurrence when enamel is exposed to high temperatures.
Large cracks and crazing forms in the material obtained.
This results in much less of a tendency for metal crazing.
By crazing is meant the presence of fractures in the hard coat.
Damage means cracking or crazing noticeable to the naked eye.
See also
Higher web tensions are more severe for metal crazing.
The plate did show crazing when folded onto itself.
Crazing or roughening of the coating shall not be cause for rejection.
These lenses also showed no crazing of the hard coat.
The process of crazing effectively increases the toughness of the unit.
And the crazing.
The test was carried out several times and showed no crazing.
We have accounted for failure by crazing that is described with a cohesive models.
There is little or no crazing.
Reduced its crazing and retained the flakes which have formed.
Heating limit is below the onset of surface oxidation and crazing.
There is some white crazing on the back but not on the front.
I do not see crazing.
This crazing makes the can more sensitive to corrosion by the packaged product.
This puts the glazes into compression and so helps prevent crazing.
To avoid crazing.
The thermoplastic phase in this instance is very susceptible to undesirable solvent crazing.
By poor adherence is meant flaking or crazing of the coating during bending the strip.
It is known that foreign matters in a polycarbonate provide a cause of the occurrence of crazing.
Applications above a very low level indeed lead to crazing and chalking on these fabrics.
The critical temperature is now defined as a temperature at which the substrates showed crazing.
Many people are already crazing over the Buxton Shoulder Bag and for great reasons.
Commercially viable coatings preferably show slight or no crazing on a reverse impact test.
Punitive crazing away stuff inside of my camp!
These coated plates also were capable of supporting multiple layers of coating without crazing.
Crazing is an interesting phenomenon, as it lacks consistency and is sometimes unpredictable.
Do not set warm dishes on a cold surface as rapid temperature changes could cause crazing.
Specifically, the mechanism of the occurrence of crazing is presumed to be as follows.
Joule forward and reverse impacts on all three compositions showed a degree of cracking or crazing.
To avoid crazing or breakage, do not set warm dishes on a cold surface.
This gives it better thermal stability and better resistance to crazing when exposed to solvents.
In some cases, the crazing can gain a more uniform appearance.
If you look closely at other ceramic grills you will see some level of crazing.
In some cases, the crazing also gains a more uniform appearance.
The manufacturing materials undergoes ductile deformation through crazing when bent at room temperature.
