Examples of 'creepage' in a sentence
Meaning of "creepage"
Creepage (noun): The gradual spread or extension of something into areas where it does not belong
Show more definitions
- A gradual, creeping movement.
- The leakage of an electrical current across the surface of an insulator (dielectric)
How to use "creepage" in a sentence
Basic
Advanced
creepage
Creepage of the high voltage must therefore be prevented.
Terminal assembly with reduced creepage.
The creepage of doubt in the absence of physical proof.
This percentage difference is termed creepage.
Creepage was measured in accordance to the scrape adhesion test.
The total width of the corrosion creepage is measured.
Smaller creepage values are indicative of superior corrosion resistance.
Board material and environment also affect creepage requirements.
Protected creepage distance.
Creepage distance to earth mm.
The second criteria being that a sufficient creepage distance is provided.
Panels with smaller creepage are regarded as having better corrosion resistance.
The corrosion performance was evaluated by measuring the creepage along the scribe.
Creepage of conductor.
The values represent total creepage about the scribe área in mm.
See also
The creepage distance is increased and the isolation characteristics are further improved.
Insulation coordination including clearances and creepage distances for electrical equipment.
Creepage is defined as the surface distance and clearance is measured through the air.
The evaluation is performed by measuring the width of corrosion creepage perpendicularly to the scribe.
The creepage values reported in the following tables reflect these final results.
This also gives high mechanical resistivity as well an extension of the creepage path.
Insulators with high creepage distance on demand for polluted areas and high altitudes.
Horizontal ring structure are arranged on the surface in order to increase the creepage length.
The creepage distance is indicated by the dotted line in Fig.
The insulation distance is formed by the sum between a spatial distance and a creepage distance.
Creepage distance requirement depends on the CTI.
In both cases, is given a creepage path extension.
The total creepage which developed is reported in Table III.
The following maximum creepage was recorded,.
The creepage distance is also optimized, because it is folded into this structure.
Table 4 lists the creepage of all tested panels.
The purpose of these fins 9 is to increase the creepage path.
The requirement corresponds to a creepage value which is lower or equal to 8 mm.
It also has circular fins 33 so as to increase the length of its creepage distance.
Consequently, the required creepage distance becomes rather long.
Generally, the greater the ratio, the greater the resistance to creepage and arcing.
When a lower voltage is applied, the creepage distance may be shorter than this.
Thus, the creepage distance is increased than the spatial distance, thereby obtaining an insulation distance.
To minimize leakage currents, especially in ventilated batteries, a creepage calculation is required.
Longer insulators with longer creepage distance for leakage current, are required in these cases.
Usually, with traditional insulation transformers, the creepage distance is critical.
In this way, a long creepage distance utilizing the length of the bushing can be obtained.
It comprises a series of fins 17 designed to increase the creepage distance of the insulator.
This can increase a creepage distance, and thus can satisfy a standard of an insulation distance.
In order to compensate this, more polymer is used and a creepage length is increased.
Similar to clearance, creepage measures distance between conductors on a PCB.
The higher the CTI value, the smaller the required creepage distance.
Overload pretection, creepage protection, no film with prompt alarming.
Safety, water and electricity are insulated, no open fire, no creepage.
Company, to prevent the fire, creepage or other damage.
