Examples of 'critical current' in a sentence
Meaning of "critical current"
Critical current: The maximum current that a superconductor can carry without resistance. When the critical current is exceeded, the superconductor returns to a normal resistive state
How to use "critical current" in a sentence
Basic
Advanced
critical current
It is characterized therefore by the absence of a critical current.
A critical current level causes destruction of the power switch.
It is desirable to increase the critical current density of the superconductor.
A critical current density is necessary to sustain the corrosion reaction.
Interrupting nominal currents or current less than the critical current.
The critical current is the lowest when all the nanoclusters are aligned.
The high power environment is the most demanding in terms of critical current endurance.
Continuous critical current measurement apparatus and method of measuring continuous critical current using the same.
Silver contacts were formed on the resulting conductor in order to measure its critical current.
Condition lacking its most critical current characteristics, its.
It is thereby possible to deposit a biaxially aligned superconductor with high critical current density.
Results of magnetic field, critical current and torque measurements are presented.
We found that the presence of skyrmions and domains alike enhances the critical current.
Jointly to a high critical current amplitude, an anharmonic current-phase relation was measured.
Social studies provide space in the school day for the discussion of critical current events.
See also
Society to a condition lacking its most critical current characteristics, its capability and.
The current passing through the material must be less than a critical current Jc.
Local critical current density and its distribution in large-area superconducting films.
This particular current density Imax is greater than the critical current density level Ic.
Critical current measures, under magnetic field and mechanical stress, have been carried out in particular.
The current of the beam ends up locally exceeding the critical current I.
The critical current of the samples was measured before and after twist testing, described below.
Furthermore they also differed, to a lower degree, in the values of critical current.
Thus, high critical field and high critical current are not necessarily related to one another.
Critical current is determined using a 1 µV / cm criterion.
Further, such a method is unsuitable for measuring the critical current of a long tape.
In any of the samples, critical current density Jc exhibits a sufficient value.
Second means 32 for detecting a critical current level ;.
The dependence of the critical current on the applied flux is depicted in Fig . 6.
Generally, these pick-ups present an inductance L close to 0.5 nH and a critical current of a few uA.
In addition, the critical current Ic has little variation along the length of the conductor.
In one particular sample, a full modulation of the critical current with about 1 T range is observed.
Critical current for the first transposed coil was measured at 115 amperes.
Fragmentation and loss of sea-ice were the most critical current conservation concerns for the species.
The critical current retention for the spliced and unspliced wire was 95 % or greater.
The total HTS cable critical current may be Ic, w WN.
Critical current is measure as described in Example 1 across a 1 cm length.
Fig . 7 ( a ) illustrates the improvement in critical current as anneal temperature is decreased.
A critical current of 161 A was measured inductively for this sample over the full 1-cm tape width.
These YBCO films achieved critical current density of more than 1 MA/cm2.
That is, when the conventional hastelloy substrate was used, the critical current density thereof was 450A.
A continuous critical current measurement method, comprising,.
In such a superconductor 110, the critical current density can be high.
With ic the critical current of the SQUID . Usually λ is of order one . [ 7 ].
For the non-transposed shaped coil the critical current reached 179 amperes.
The Cowan-Brown critical current density is found to be about 2.4 milliamperes per sq . cm.
The HTS wires provide an overall critical current of a desired performance, e.g., a desired current load.
If it is below the critical current density, a multi-pass film is formed.
You'll also be interested in:
Examples of using Current
Show more
The current national legislation on adoptions states
To temporarily alter the current programmed temperature
Current prosecutions of the crime of abduction of minors
Examples of using Critical
Show more
There are critical challenges that require attention
Teach youth skills for critical analysis
Critical group infant drinking water source
