Examples of 'cross brace' in a sentence
Meaning of "cross brace"
A cross brace refers to a diagonal support used to strengthen the structure of a framework or scaffolding system. It is typically positioned in an X shape between two vertical or horizontal elements to provide stability and prevent the structure from collapsing or bending under pressure
How to use "cross brace" in a sentence
Basic
Advanced
cross brace
Cross brace not shown for clarity.
There are corresponding numbers on the cross brace label.
Single steel cross brace to provide stability.
This will be your cross brace.
Cross brace looks cooler in person.
Remove the existing upholstery from the cross brace.
Attach the cross brace to the hopper support tubes.
The car was built on a heavy steel chassis with a substantial cross brace.
A cross brace portion extends between the side support portions.
Brackets must lock in the cross brace tubes when fitting the seat.
Slide cross brace extensions in or out to reach the desired overall width.
The addition of the new cross brace could not have caused this.
Or they would probably NOT have responded to my cross brace.
The reliable wheelchair with dual cross brace offers you a safe ride.
Motorcycles sold in America had high handlebars with a cross brace.
See also
It is recommended that you install a cross brace within the wall at the mounting height.
Comes fitted with an injection moulded Renthal cross brace pad.
Fit the cross brace between the side rails, as shown.
It is also possible to use these for the fastening to the cross brace 9.
Cross brace portion 30 extends between the fixed legs.
The two clamp means are pin mounted on a tubular cross brace 46 of the main frame.
A cross brace ( a noggin ) should be positioned directly above the subwoofer.
Afterwards open the central cross brace bolt ( 3 ) and remove the bolt.
The remaining opposing sides of the tower are formed by a collapsible gate 18 and a cross brace 34.
A second similar generally rectangular horizontal cross brace 37 is formed in the lower middle portion 22.
Then remove and reverse the composite sleeves ( 4 ) also 180 and reposition them at the cross brace.
Right now, this cross brace is the only thing that 's holding her arm in place.
Insert the bushing ( Y ) into the cross brace 7.
Assemble two identical legs and a cross brace ( R ) using machine screws, washers, spring washers and nuts S.
Previous: cross brace.
The structure of front cross brace 54 comprises horizontal upper and lower cross pieces 58 and 60, respectively.
This will disengage cross brace supports Fig . 37.
The top edge of the cross brace 23 then releases the front edge 48.
Remove the bolts that connect the cross braces and the cross brace extensions Fig . 38.
