Examples of 'cross-cut' in a sentence
Meaning of "cross-cut"
Cross-cut (noun) - A type of film editing technique where a cut is made from one scene to another that is happening simultaneously
Show more definitions
- Alternative spelling of crosscut
How to use "cross-cut" in a sentence
Basic
Advanced
cross-cut
Proceed as for a vertical straight cross-cut.
The cross-cut models include safety interlocks.
Remote control of a winch in a haulage cross-cut.
They were in the four cross-cut north section.
Cross-cut with photos of a janitor sitting in his jacuzzi.
Currently we offer a cross-cut and a radial cut.
Use a cross-cut shredder to destroy envelopes and documents.
The tension button of the cross-cut fence is.
All cross-cut shredders require oil for peak performance.
Do not use this saw to cross-cut roundwood.
A new cross-cut shredder has been procured and is now in use.
The volcanic rocks can be cross-cut by lamprophyre dikes.
The layer adhesion was measured by means of a cross-cut test.
These lavas were later cross-cut by intrusions of trondhjemite.
Looks like a mulay saw but sharpened as a cross-cut saw.
See also
To confirm these measurements a cross-cut metallographic analysis was also done.
Buy a cross-cut shredder to destroy documents you no longer need.
This warning is found on the cross-cut version only.
Take the cross-cut fence from the bench plate.
The dykes are generally subvertical and cross-cut the regional foliation.
The cross-cut test shall be considered to have given a satisfactory result if.
Vertical swivel function on the circular cross-cut saw are deactivated however.
The cross-cut tester is a simple method to evaluate the adhesion of a paint or coating.
An adhesive strip is adhered to the cross-cut surface and is then removed by tear.
Cross-cut wood soaks up wood stain and so usually looks too dark.
A precise setting is not possible with the graduations on the cross-cut fence.
The rails may be cross-cut intermittently down to the base material.
Each dome-shaped region is provided with a slit or cross-cut partially thereacross.
Your cross-cut and mitre saw has been accurately adjusted at the factory.
Adhesion properties can be quantified by in-vitro methods such as a cross-cut adhesion test.
The cross-cut test is commonly applied to paints, varnishes and similar products.
Secure destruction methods including cross-cut shredding and the use of attestations of destruction ;.
The cross-cut test is a recognized industrial standard test for measuring adhesion of coatings.
The same thickness values were found by cross-cut metallographic analysis of the substrate samples.
Set the bevel to the angle required and proceed as for a cross-cut mitre.
Only place the cross-cut fence on the righthand side of the saw blade.
Slide the workpiece to the desired position using the cross-cut ruler as a measure.
With this method the cross-cut fence must be secured at the angle required.
Festool offers you a comprehensive range of accessories for your circular cross-cut saw.
On the basis of cross-cut tests, it was found that all coatings showed a poorer adhesion.
Developed to provide for the splitting of the air in the last open cross-cut.
It is then necessary only to cross-cut the bar material into inserts of suitable width.
The scanners supply data for optimising software controlling cross-cut or rip-saw operations.
This should cross-cut traditional academic disciplines rather than be merely circumscribed to business studies.
First you will begin crevassing, then cross-cut using the singular jacking method.
The cross-cut style tip gave a larger fan width than the dome style.
These test samples were used for cross-cut tests to study the performance of the coatings.
Then a peeling test of the coated film was conducted using cross-cut adhesion tape test.
Rembrandt basin is cross-cut by a large lobate scarp running from the southwest to the north.
These differ from thematic priorities in that they cross-cut or overlay all of the themes.
