Examples of 'crossover frequency' in a sentence
Meaning of "crossover frequency"
crossover frequency: This phrase is a technical term used in audio engineering to denote the point at which the frequency response of two connected devices, such as speakers or amplifiers, intersect or cross over. It is a critical parameter for ensuring proper sound reproduction and system performance
How to use "crossover frequency" in a sentence
Basic
Advanced
crossover frequency
Rear chamber for lower crossover frequency.
Adjust the crossover frequency to suit your tastes.
High pass filter with adjustable crossover frequency.
Adjust variable crossover frequency with control as desired.
Low pass filter with adjustable crossover frequency.
Choose the crossover frequency by your taste or music genre.
When your amplifier is equipped with crossover frequency.
Adjusts the upper crossover frequency of the amplifier.
Crossover frequency between them.
Near the crossover frequency.
Control potentiometer for the highpass or lowpass crossover frequency.
This crossover frequency may be constant or variable over time.
If your amplifier is not provided with a crossover frequency setting.
The crossover frequency in the four remaining areas is much higher.
Now you can set an appropriate low pass crossover frequency.
See also
Setting the crossover frequency individually for the different channels.
You can adjust the delay for cancellation at the crossover frequency.
Also make sure the crossover frequency is set to a reasonable value.
The implementation thereof is hereinafter referred to as the crossover frequency control module.
The crossover frequency controls of the connected subwoofer are set to the maximum.
The numbers above the switch tells you the crossover frequency points.
The crossover frequency can be set individually for the different speakers.
Mute all bands other than the two surrounding the crossover frequency.
The crossover frequency of the core coder may be constant or variable over time.
Optimizes the subwoofer and high pass outputs for the selected loudspeaker or crossover frequency.
Crossover frequency control adjusts the cutoff frequency of the subwoofer low pass filter.
It allows to select the crossover frequency of the SUB amplifier.
The crossover frequency adjustment on the subwoofer is only possible when using the LINE INPutS.
A channel switched OFF via the crossover frequency is completely switched off.
The Crossover Frequency control determines the frequency below which the subwoofer will play.
You can not adjust the crossover frequency higher than the HPF or.
One map unit is equal to a 1 percent crossover frequency.
The correct crossover frequency setting depends on the bass handling capacity of your satellite speakers.
Turn the FREQUENCY knob to obtain the best matching crossover frequency with your main speakers.
Adjusts the crossover frequency for the selected speakers high pass filter or low pass filter.
Frequency range Filter crossover frequency.
Button for the crossover frequency of the subwoofer Button not pressed.
This can be balanced by reducing the Level and Crossover Frequency at the subwoofer.
Measured speaker crossover frequency is set for each speaker after the Auto Calibration.
Thus, these bands will cover the lowest frequencies up to a certain crossover frequency.
Control for adjusting the crossover frequency of the low pass filter for the subwoofer output.
Track loop gains are updated using the calculated open-loop crossover frequency.
Z Highpass and lowpass crossover frequency adjustments have been set provisionally.
The positioning of the subwoofer is not critical if you select a crossover frequency below 80Hz.
Adjust the variable HPF crossover frequency to the desired frequency using.
In general, the smaller the main speakers are, the higher the crossover frequency should be.
If the crossover frequency is adjustable, set it to maximum.
As a guidance, observe the lower crossover frequency of the main speakers.
The crossover frequency control changes the upper cut-off frequency of the subwoofer.
Fig . 8 compares the effect of regrind on crossover frequency for various compositions.
You'll also be interested in:
Examples of using Frequency
Show more
Adjusts the higher frequency of the sound
The frequency of armed conflicts is on a downward trend
The desired station frequency is not tuned in
Examples of using Crossover
Show more
The internal crossover can not be bypassed
A solo act to be the next big crossover
The road at the crossover has no importance
