Examples of 'crystal grains' in a sentence
Meaning of "crystal grains"
crystal grains - Refers to small crystalline particles or structures that are commonly found in materials like metals, ceramics, and minerals
How to use "crystal grains" in a sentence
Basic
Advanced
crystal grains
The crystal grains and fragments.
Surface roughening is caused by undulation of coarse crystal grains.
The volume ratio of crystal grains is determined by the line segment method.
A nanocrystalline material has a significant fraction of crystal grains in the nanoscale.
Coarsening crystal grains increases a machinability but incurs the risk of decreasing a strength.
Crystallisation method with control of the orientation of the crystal grains.
Carbonitrides are present both in crystal grains and along crystal grain boundaries.
The electrofused magnesia gives rise to a filler composed of single crystal grains.
A nitride contributes to prevention of crystal grains becoming coarse due to the pinning effect.
It also has an effect to improve burring workability by making crystal grains fine.
The refinement of crystal grains further improves the SSC resistance.
This inhibits flow of a molten pool in a solidification process and formation of crystal grains.
That is, the number of crystal grains in a measurement field are counted.
N is an important element to precipitate AiN and the like and miniaturize crystal grains.
That is, the number of crystal grains in a measured view is measured.
See also
A microcrack is a crack in a single crystal grain or a crack extending through several crystal grains.
Consequently, the crystal grains can not be refined effectively.
A grain boundary phase which is amorphous or partially crystalline is present between crystal grains.
As a result, it refines crystal grains and increases the toughness of steel.
This map shows the strain distribution based on local orientation changes in crystal grains.
Incidentally, the method of measuring crystal grains is set as described previously.
A grain boundary phase that is amorphous or partially crystalline is present between the crystal grains.
Ni also serves to promote refining of crystal grains of hot-rolled steel sheets.
It was also observed that the intermediate layer had columnar or oval magnetic crystal grains.
At the same time, the crystal grains become fine and spherical.
Ti forms nitride, thereby contributing to prevent the coarsening of crystal grains.
However, refining the crystal grains gives concern of deterioration of press formability.
It includes a class of hard minerals occurring as lath - or plate-shaped crystal grains.
Also, coarse crystal grains degrade the surface state of the resulting material.
If the normalizing treatment is performed, the crystal grains of steel are made fine.
The silicon crystal grains which crystallize then are referred to as “ eutectic silicon grains ”.
Carbo-nitrides and nitrides in fine form in the steel make crystal grains finer.
The crystal grains remain coarse as they are, so the fracture toughness is greatly degraded.
Tempered martensite is an aggregate of lath-shaped crystal grains and includes the iron-based carbide therein.
If the crystal grains are too large, tearing tends to occur when pulling the film.
Furthermore, Nb has an effect of refining crystal grains after transformation.
Meanwhile, coarsening crystal grains may incur the risk of decreasing a hydrogen brittleness resistance.
N combines with Ti to form fine TiN, thereby refining crystal grains.
Thus, the size of the crystal grains in the steel sheet structure also is fine.
In addition, Ti forms a nitride and contributes to prevention of crystal grains becoming coarse.
One of such crystal grains is enlarged and shown in FIGURE 3.
If contained, Ti forms nitrides, and refines crystal grains through a pinning effect.
One of these needle-like crystal grains is likewise enlarged and shown in FIGURE 4.
These inclusions, if they are fine, cause crystal grains to be finer.
The magnification is preferably adjusted to cover 200 or more crystal grains.
In addition, Cu also contributes to refining of crystal grains of the hot-rolled steel sheets.
With reference to FIG . 19, PCP occurred along the crystal grains.
The preferable number of crystal grains is 500 or more.
Also, Patent Document 2 proposes a method which refines the crystal grains by quenching the steel twice.
The volume fraction of crystal grains is preferably 30 % or more.
You'll also be interested in:
Examples of using Crystal
Show more
Crystal meth maybe where you are from
Let me just be crystal clear about this
Crystal and polished stainless steel facing
Examples of using Grains
Show more
Use of food grains for biofuel production
People being stepped on like so many grains of sand
Tough grains or a mixture of grains and beans
