Examples of 'cure time' in a sentence
Meaning of "cure time"
Cure time: The period required for a material to reach its full strength or effectiveness after a process like drying or reacting
How to use "cure time" in a sentence
Basic
Advanced
cure time
Lower temperatures will result in a slower cure time.
The potlife and cure time are both affected by temperature.
Heat may be used to accelerate the cure time.
Forty minutes cure time was given between each coat.
They were attempting to cure time.
The quick cure time allows many coats to be built up quickly.
At the optimum cure time opt.
Cure time is essentially two hours depending upon ambient conditions.
A significant advantage of the process as disclosed is a dramatic reduction in cure time.
Cure time may vary from one hour to three days.
In yet other embodiments a sealant having a long cure time is included.
Epoxy cure time is the final stage of the cure time.
Toughness can be improved by increasing cure time at the expense of cure temperature.
The cure time of the base gel varies according to the manufacturer.
Lower temperatures or large gaps will tend to extend the cure time.
See also
So oil paint has a cure time of between three and seven days.
Crush strength of the green pellets decreases with increasing cure time.
The very short cure time allows quick stripping of the part.
The dry samples showed no such scorch and cure time changes.
The cure time depends on the light intensity and the specific formulation.
Minimised downtime due to its fast cure time compared with concrete.
The addition of small amounts of acid hardly influences the cure time.
The cure time and temperature have considerable influence on the mechanical properties.
It has a working time of five minutes and a cure time of fifteen minutes.
This cure time allows the bar to become harder and longer lasting.
The time required to reach the peak exotherm was recorded as the cure time.
After sufficient cure time the produced foams were submitted to physical property determinations.
The time required to reach the peak exotherm is recorded as the cure time.
The long cure time along with solvent removal necessitate the use of festoon curing areas.
This pressure release is performed only once during the cure time of each polyurethane foam.
Total cure time before wave testing was 6 days.
Initiator AC provides a slow stroke cure time in the present formulations.
Colder water will give a longer Working Time and slower Cure Time.
Also, a sufficient cure time should be provided.
The cure time is usually reduced substantially by heating the lay-up.
In any event, even an accelerated cure time decreases manufacturing efficiency.
The cure time for skin laminate is 2 hours at ambient temperature.
Time will cure you, but you can cure time yourself.
Of course, the cure time is dependent on the temperature.
In general, a lower cure temperature may be used if a longer cure time is employed.
The usual cure time is normally on the order of 1 hour.
Higher catalyst concentrations and / or higher temperatures can shorten the cure time.
This corresponds to an in vivo cure time of 13 minutes in an inflatable endovascular graft.
Cure time is the time required at that temperature to produce a tack-free polymer.
A method for controlling the cure time of a silicone foamable composition comprising by weight,.
This coating was designed by DSM-Desotech to minimize cure time and water absorption.
The total cure time for the compression molding was 2 minutes.
A pot life of over 1 hour was achieved with the cure time still being approximately 3 hours.
The cure time may be varied to adjust for end-use needs.
Obviously, the length of the cure time will vary with the cure temperature.
