Examples of 'cut depth' in a sentence
Meaning of "cut depth"
cut depth - This phrase is commonly used in the context of construction or manufacturing to refer to the reduction in the vertical distance or thickness of a material or structure
How to use "cut depth" in a sentence
Basic
Advanced
cut depth
Cut depth adjustment variable trapezoidal spindle.
It makes it possible to maintain a precise predetermined cut depth.
The cut depth is also determined by the power.
Insufficient reproducibility of the cut depth results in the drawbacks described above.
Cut depth adjustment and limiting is available as optional accessories.
Press the saw slowly down to the set cut depth and.
The cut depth is too small.
The cutting mechanism may also have different cut depth activation buttons.
Proper cut depth helps to reduce potential for dangerous.
And follow these instructions in order to set the depth stop at a specific cut depth.
Cut depth adjustment threaded spindle with depth gauge.
Calculation of target diameter Diameter reached less the cut depth.
Cut depth adjustment stepless threaded spindle with depth indicator.
Figure 1 shows a graph of kerf cut depth vs pass number.
The cut depth can now be adjusted by turning the depth adjustment screw D.
See also
Switch on the machine, press down to the set cut depth.
Adjust the cut depth until the desired height is reached Image K.
When sawing with the guide rail, the cut depth is.
Cut depth adjustment electro hydraulic/smoothly adjustable.
Furthermore, standard deviation of the cut depth was reduced by a factor of two.
Cut depth adjustment tail wheel; stepless with depth gauge.
The amount of translation in the direction of arrow 46 is the desired key cut depth.
Adjust the cut depth during the cutting stage, and.
Before you start sawing, tighten the adjustments for the cut depth and angles.
There are three methods of cut depth adjustment, depending on the accuracy and control required.
Before starting work, tighten the setting devices for cut depth and cut angle.
The cut depth value is equal to or less than 0, or higher than 3 mm.
Turn the Micro Winder clockwise to increase cut depth and anti-clockwise to reduce cut depth.
The cut depth is as deep as the upper surface of the projecting block 23.
Set the plunge saw on 5 mm cut depth.
Turn clockwise to increase cut depth, anti-clockwise to reduce cut depth.
Adjust the saw until the required depth is achieved, according to the Cut Depth Scale 20.
Adjust the cut depth to the desired level using knob C Fig . 5.
The 85 front rake of the cutter results from the cut depth of the round file.
The cut depth should be around 1/3 of the trunk diameter.
Set the shoe to the desired cut depth using knob C Fig . 2.
The cut depth adjustment can be set from 0mm to 12mm.
Set the desired cut depth using knob C Fig . 4.
A score cut depth can be established that creates the optimal C.R. / S.E. blister package.
