Examples of 'cut edges' in a sentence
Meaning of "cut edges"
cut edges: This phrase refers to the act of trimming or removing the sharp or rough edges of something. It suggests the action of refining or smoothing the edges to make them more even, neat, or safe. It can be used metaphorically to describe the process of eliminating flaws or imperfections in a situation or process
How to use "cut edges" in a sentence
Basic
Advanced
cut edges
The saw cut edges can be improved by.
An undirected connected graph with no cut edges.
The cut edges remain protected against corrosion.
There is no need to seal the cut edges.
The cut edges can partially still one.
The coupling potential of cut edges was measured.
Cut edges are clearly visible.
Appearance of the cut edges of the systems is examined.
Burn marks at the cut edges.
Remove burrs from cut edges of pipes with a remover.
For labels and images with cut edges.
Sand all cut edges to remove any rough areas.
Protection of the profile cut edges.
Remove burrs from cut edges of the pipes with remover.
Pocco veccio hand cut edges.
See also
The cut edges were then finished by hand with sand paper.
To prevent fraying on the cut edges.
Prevent brown discoloration of cut edges and to guarantee longer freshness.
The blobs also have clear cut edges.
The cut edges should then be sealed so that no moisture can penetrate.
I do not like raw cut edges.
The resulting cut edges could cause the lamination foil to jam.
The slabs may have irregularly cut edges.
Drawer overlaps will conceal cut edges on all sides of the opening.
It was of uniform thickness and appeared to have cut edges.
Of course it is possible for all cut edges to be coated after cutting.
The vases have a thick quality glass and beautifully cut edges.
The resulting cut edges could cause the foil pockets to jam.
It tends to do this from cut edges.
Carefully melt and seal the cut edges of material using the lighter.
Freshly cut edges are flame polished before use to remove the rough edge.
Remove any burrs or debris from the cut edges with a file.
The cut edges of the film will shrink away from one another.
The samples were then examined at the cut edges with a scanning electron microscope.
Long application period due to strong hypoallergenic adhesive and precisely cut edges.
A test consisting in measuring the cut edges potential of coated steel sheet was realized.
The cut edges of the transparent plates may be resealed to retain the liquid crystal.
They could also be so formed that the cut edges are mutually spaced apart.
The appearance of the cut edges wasexamined by means of topographic survey for monitoringits evolution.
Anthocyanin synthesis occurred near the cut edges of the petals in each case.
Skivving of the edges is followed by folding the skivved areas over the cut edges.
The fibrous nature of surfaces and cut edges can cause skin irritation.
Melting the cut edges effectively fuses or welds the layers and fibrous matter together.
Application of a strengthening resin composition to the cut edges ameliorates the decrease in impact resistance.
Smooth the cut edges with sandpaper and remove the residues before continuing the project.
Flashing with a silicone rubber roller and seal all exposed cut edges with Lap Sealant.
The checkbox Cut Edges provides the ability to display a report without page edges.
Apply Lap Sealant around all exposed cut edges of the QuickSeam FormFlash.
Overlapping / repair bonding and sealing of cut edges.
Seal all exposed cut edges of the QuickSeam FormFlash with Lap Sealant.
