Examples of 'cut filter' in a sentence
Meaning of "cut filter"
a filter used in photography or filmmaking to reduce or eliminate certain wavelengths of light. It is typically used to adjust the color balance or to create specific visual effects in the final image or video
How to use "cut filter" in a sentence
Basic
Advanced
cut filter
Low cut filter will have no effect.
How do you use a low cut filter.
Infrared cut filter ensures accurate color representation.
To activate the bass cut filter.
The infrared cut filter is constantly separated from the lens.
This shows whether the low cut filter is on or off.
Control for adjusting the limit frequency of the low cut filter.
Each channel is equipped with a low cut filter to attenuate these frequencies.
Stereo channels does not feature this low cut filter.
An infrared cut filter also provides useful image and video recordings at night.
The headsets are delivered with the bass cut filter deactivated.
The IR cut filter is permanently activated day mode.
Optical transmission of Baader infrared cut filter.
Mechanical IR cut filter for day and night functionality.
Settings for the swivelling IR cut filter ICR.
See also
Low cut filter switch with status LED.
This is used to select the IR cut filter operation mode.
Low cut filter for suppressing low-frequency signals.
Not all cameras have the IR cut filter that can be removed.
The frequency from which the signals are filtered Low Cut Filter.
You can also use the Low Cut Filter to remove unwanted low frequency rumble.
For this reason, it is also sometimes referred to as a low cut filter.
Sets conversion time of IR cut filter while in Automatioc Mode.
Low cut filter is useful for reducing low-frequency noise.
The filter is sometimes called a high-cut filter, or treble cut filter in audio applications.
Day / night camera with mechanical IR cut filter.
Auto, The cut filter swivels in or out automatically according to the light sensor.
Day / night switching with mechanical IR cut filter.
Auto, The cut filter pans in or out automatically according to the light sensor.
Day / night switching Electromechanical IR cut filter.
In live sound applications, the Low Cut filter is especially useful for removing stage rumble.
This cut filter 23 has also a function to close the optical block 3.
There is even a 20dB attenuation pad for close micing, as well as a low cut filter.
Off, The IR cut filter is permanently deactivated night mode.
MIC, for microphones, low cut filter switched.
Low cut filter on / off status.
Hz high pass MIC -: low cut filter switched off.
Switchable 30Hz low cut filter eliminates unwanted, power consuming, subsonic frequencies . 3 different working modes.
OFF: If you select this mode, the IR cut filter is switched off.
No icon, Low cut filter off, Low cut filter on.
Fig . 11B is a figure showing an example of 3 dots updated by noise cut filter process.
In day mode the infrared cut filter ( ICR ) is constantly in front of the lens.
Fig . 11A is a figure showing an example of 3 dots chosen by noise cut filter process.
The microphone 's switchable bass cut filter ( refer to fig . 2 ) further reduces low-end distortion.
The C3000 provides selector switches for the preattenuation pad and bass cut filter.
EXT, If you select this mode, the IR cut filter is set to external signal.
Peak limiter prevents signal distortion Switchable 75Hz / -24dB low cut filter Adjustable input sensitivity.
