Examples of 'cut metal' in a sentence
Meaning of "cut metal"
cut metal - the act of removing material from a metal workpiece, often done using tools or machinery such as saws or lasers
How to use "cut metal" in a sentence
Basic
Advanced
cut metal
Do not cut metal with this mortiser.
You buy a piece of equipment to cut metal.
Do not cut metal with this saw.
To weld the arcs cut metal band.
Do not cut metal film or film containing.
Similar to oil being used to cut metal.
You just cut metal with fire.
The process uses an electric arc to cut metal.
Do not cut metal in this mode.
There are many tools which made to cut metal.
Measure and cut metal ductwork.
There are many technologies available to cut metal.
Do not cut metal objects such as nails and screws.
Do not use the saw to cut metal or masonry.
Do not cut metal workpieces that must be hand held.
See also
Diamond abrasive wheels can not be used to cut metal.
Do not cut metal or masonry with this circular saw.
We do not just cut metal.
Shears that cut metal will cut skin easily.
The spring members can comprise laser cut metal.
Cut metal retaining straps securing protective top skid.
In laser cut metal.
Cut metal edges are sharp and may cause serious injury.
The excess liquid was removed with a clean cut metal blade.
Laser cut metal screen.
The tab can comprise a laser cut metal wall tab.
Quickest way to cut metal panels for complex roof installations.
All laser engraving machines can not carve and cut metal.
Never operate the dry cut metal saw without the guards in place.
Never perform any freehand operation with the dry cut metal saw.
Prior to inspecting the dry cut metal saw be sure to disconnect the power plug.
Always wear eye protection when using the dry cut metal saw.
DO NOT grind or cut metal with a diamond wheel.
This kind of key can be easily made with machines designed to cut metal.
Do NOT cut metal or metallic materials when the machine is configured as a Table Saw.
This cordless band saw can be used to cut metal and hard plastic.
These properties enable laser devices to produce powerful laser beams that can even cut metal.
Metal cut Metal is cut by Laser Machine without burr.
DO NOT attempt to plunge cut metal.
They are used to cut metal siding, eavestrough and profiles.
For your own safety read this instruction manual before operating the dry cut metal saw 1.
Never cut metal while standing on a flammable surface, such as wood or tar paper.
Because down there, we cut metal with fire.
However, to cut metal pipe you do not have to spend money on a specialty tool.
Do you know the only way to cut metal underwater?
To cut metal and more particularly the steel profiles, different tools can be used.
According to the existing dimensions, cut metal filter for the frame.
It has been used by welders for more than a 100 years to cut metal.
With the laser process it is possible to cut metal and non-metal materials.
The cut metal windings may then be surrounded by a biocompatible insulation material ( e.g., parylene ).
You'll also be interested in:
Examples of using Cut
Show more
Or someone she cut loose got mad
Cut wire liner at the right length
Now you cut this man down
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
