Examples of 'cut portion' in a sentence
Meaning of "cut portion"
cut portion - This phrase can refer to a piece of something that has been removed, reduced, or trimmed, typically in the context of food or material
How to use "cut portion" in a sentence
Basic
Advanced
cut portion
The cut portion is welded to achieve a reliable seal.
Note that cord is kept on cut portion of lawn.
The cut portion is opened to collect the ball.
Allow the gel to come out of the cut portion.
A cut portion is formed in the flange.
An adhesive tape was applied on the cut portion and then peeled off.
The cut portion of the cutter is substantially cylindrical in shape.
After spraying, a bulge width at the cut portion was measured.
The cut portion shows a circular or rectangular plate shape.
Accordingly, it is preferable to form the recess portions without any cut portion.
Slide the cut portion of flooring towards the pivot of the blade and cut again.
After cycle test, a maximum width of blister on both sides of a cut portion was measured.
The cut portion may include printing and serves as a promotional item with improved pilfer resistance.
The thus obtained stripped and cut portion is filled with the low-conductivity member.
Next, the decorative material is bent at the arc-shaped portion in the second cut portion.
See also
Therefore, no cut portion is provided therein.
FIG.2B is a schematic perspective view showing the removed spherically cut portion.
When you cut portion sizes, you have to replace it with something else.
Figure 12 is a view of means for removing the cut portion of sheet.
A cut portion is melted and sealed by the heat source 13.
Regulation member 340 is provided with a cut portion extending upward from the center portion.
The cut portion is shown by a space E in FIG . 6.
Therefore, it is difficult to obtain a smoothed cut portion 909.
The position of the cut portion 167a may be controlled by a controller.
Positions, respectively, facing each other across the cut portion 11.
Reconnect the cut portion ( A ) of the duct to the blower housing.
The orifice 34 may be vertically formed on the cut surface of the cut portion 32.
A cut portion 97a is formed in the heat exchanger fixing portion 97.
The elongated portion 38b fits into a cut portion 42 formed in a partition of the casing body 39.
A cut portion 42 is formed in the vicinity of the open end of each slit 41.
The plate member 82 may have a cut portion 81 extending along the side edges thereof.
The cut portion 81 may be positioned on the surface comprising the boss 90.
Reference numeral 909 shown in Fig . 4 denotes a cut portion formed as a result of the above-described cut-off.
The cut portion of the introducer 40 outside the graft conduit 30 is discarded.
Fig . 3 shows a side view of a traverse cut portion as seen in direction B in Fig . 1 ;.
The die cut portion 50 is then wrapped around the three-dimensional carrier 36.
In some embodiments, the cut portion 245 may be in the shape of a trapezoid.
Cut portion 88 is thereafter removed through anterior incision 44 with a custom femoral head bone grasper 94 Fig.
In other embodiments, the cut portion 245 may be in the shape of a rectangle or square.
The cut portion 663 forms louvered spring elements, which when folded support individually the gum slabs 614.
The thus cut portion is used as the roll sheet 300.
You'll also be interested in:
Examples of using Cut
Show more
Or someone she cut loose got mad
Cut wire liner at the right length
Now you cut this man down
Examples of using Portion
Show more
Portion of operational budget covered by assessed contributions
Imagine if even a portion of a female unit were pregnant
Portion not treated with antiretroviral medicines
