Examples of 'cut to length' in a sentence
Meaning of "cut to length"
cut to length - This phrase is often used in the context of manufacturing or construction industries. It means to trim or adjust something, such as a piece of material or a component, to a specific desired length or size
How to use "cut to length" in a sentence
Basic
Advanced
cut to length
Duct seam can be cut to length if necessary.
The conductor assembly is then cut to length.
May be cut to length and end soldered on.
Cut it down and then cut to length.
Cut to length and strip the ends appropriately.
Cables can be cut to length in the field.
The plate is then leveled and cut to length.
We cut to length dependant on your requirements.
Are flexible and can be cut to length on site.
Cut to length without waste.
The fiber may then be cut to length.
The element is cut to length to define a beam part.
The fibers may then be cut to length.
Simple cut to length line.
These billets are then cut to length.
See also
Metal cut to length line.
These filaments are later cut to length.
Cut to length and split.
Can easily be cut to length on site.
Cut to length of commercial components.
The stalk must then be cut to length at destination.
Mark the pipe at the desired length if it is being cut to length.
They will be cut to length later.
Both the plastic and cloth were then cut to length.
Slitting and cut to length machine.
This means that the cover must be cut to length.
The pipe is then cut to length and tested.
You can purchase these pieces already cut to length.
The impression is cut to length as dictated by the desired style.
The extruded tube is cut to length.
Can be cut to length or in multiples.
Upper flue section can be cut to length if necessary.
To cut to length.
The extruded material can be cut to length by a cutter.
Each blade is cut to length and placed into a garden of fungus.
The rod was then cut to length.
It is cut to length as needed.
Then the hose was cut to length.
The stock is cut to length and the ends are typically chamfered.
The separator is then cut to length.
The extrusion is cut to length for the final cosmetic stick.
The slots are formed before the connector is cut to length.
Premium rubber can be cut to length for exact fit.
The orange silicone exhaust elbow would need to be cut to length.
The bars can easily be cut to length as required.
Panels are then stripped of the carrier sheets and cut to length.
Glass tube cut to length.
The material can be extruded in sheet format and cut to length.
The reinforcing bars are cut to length and bent to specific configurations.
The last stone installed on every row may need to be cut to length.
