Examples of 'cutoff frequency' in a sentence
Meaning of "cutoff frequency"
In the field of signal processing, 'cutoff frequency' refers to the frequency at which a system's output decreases by a specified level compared to its maximum output
How to use "cutoff frequency" in a sentence
Basic
Advanced
cutoff frequency
Low cutoff frequency of the bandpass filter.
Selecting the speaker output cutoff frequency.
High cutoff frequency of the bandpass filter.
Selecting the subwoofer cutoff frequency.
As a result the cutoff frequency constraints are tougher.
This computation is then used to determine a cutoff frequency.
The natural cutoff frequency can be expressed as.
Turning the control counterclockwise moves the cutoff frequency.
The cutoff frequency and level of this output are adjustable.
Every filter has a cutoff frequency.
The cutoff frequency can be calculated from that value.
Rotate the dial to select the desired cutoff frequency.
Value of the cutoff frequency for the lowpass filter.
The focus is primarily on expanding the lower cutoff frequency.
Value of the cutoff frequency for the highpass filter.
See also
This signal is then used to sweep the cutoff frequency of a filter.
The cutoff frequency can be anywhere in the audio spectrum.
The following three conditions are considered to smooth the cutoff frequency f i.
Frequencies above this cutoff frequency point are greatly attenuated.
It reduces the volume of all frequencies above the cutoff frequency.
This cutoff frequency was established empirically with listening tests.
The phase loop is characterized by its cutoff frequency or by its time constant.
The cutoff frequency in the third frame is left unchanged.
The frequency band above the cutoff frequency setting will be cut.
The filter cutoff frequency is a linear function of the applied control signal.
The serial low pass filter has a pretty low cutoff frequency.
Plasma cutoff frequency.
Cutoff frequency of.
Any frequencies outside the cutoff frequency are cut gradually in a downward sloping curve.
This may stabilize the bandpass of each contact up to the cutoff frequency thereof.
Beta cutoff frequency.
Frequency to remove doppler signals whose frequency is lower than the cutoff frequency.
High cutoff frequency.
Virtual Super Bass will reproduce the frequencies that are lower than this cutoff frequency.
A cutoff frequency of a few tens of kHz can be chosen for that first filter.
Crossover frequency control adjusts the cutoff frequency of the subwoofer low pass filter.
Sets the cutoff frequency of the filter through which the white noise passes.
Messages which adjust the filter cutoff frequency set for each Voice.
Cutoff frequency is the frequency beyond which the filter will not pass signals.
The filter has a relatively low cutoff frequency relative to the frequency of the oscillator.
Cutoff frequency calculation means operating as a function of the signal delivered by the physiological sensor.
The mode with the lowest cutoff frequency is termed the dominant mode of the guide.
Modifies the tonal color of the sound by cutting the signals below the Cutoff Frequency.
The cutoff frequency has to be higher than the highest frequency used for transmitting.
Observation systems are characterized by the cutoff frequency fc above which the MTF is negligible.
The optimum cutoff frequency may deviate from this nominal value according to personal preferences.
These sweeps are created by varying the cutoff frequency of the VCF sometimes very slowly.
The cutoff frequency of the SH mode is nil.
The HFR decoder then extrapolates an envelope from the lowband cutoff frequency and upwards.
B To select the cutoff frequency to the subwoofer.
You'll also be interested in:
Examples of using Frequency
Show more
Adjusts the higher frequency of the sound
The frequency of armed conflicts is on a downward trend
The desired station frequency is not tuned in
Examples of using Cutoff
Show more
Sets cycle for cutoff time shift
The cutoff switch is in place and ready to go
You have ten days to the cutoff
