Examples of 'cutting disk' in a sentence
Meaning of "cutting disk"
A cutting disk is a rotating tool used for cutting or removing materials such as metal, plastic, or wood. It typically consists of a thin circular blade with sharp edges and is commonly attached to power tools such as angle grinders or circular saws. Cutting disks are commonly used in construction, fabrication, and various DIY projects
How to use "cutting disk" in a sentence
Basic
Advanced
cutting disk
Put the cutting disk on the holder.
Preventing contacts with the cutting disk.
Hold cutting disk with one hand.
Place the grinding wheel or cutting disk on the spacer.
Slide the cutting disk holder onto the drive shaft as far.
Check that the screws in the cutting disk are tight.
Uncouples the cutting disk when lowering the coupling lever.
Wait for some seconds until the cutting disk.
Attach a thin cutting disk to your rotary tool.
Do not exert side pressure on the grinding wheel or cutting disk.
This produces the opposed cutting disk oscillations of this tool.
Do not use the brushcutter with the wood cutting disk.
The present invention relates to a cutting disk presenting a vibration dumping sheet.
The cutting disk and the protection cover should be level in all directions.
These problems increase as the cutting disk diameter decreases due to wear.
See also
Cutting disk for forming a scribed line and method of manufacturing the same.
The first is that the weight of each cutting disk blade is reduced.
That is, the cutting disk is generally coplanar with the compartment.
Each pushrod is connected between the eccentric shaft and a respective cutting disk.
Wait for some seconds until the cutting disk reaches its maximum speed.
The skirt of the protector must not be worn when working with the cutting disk.
Adjust the handle such that the cutting disk slightly tilts forward in your working position.
Remove the 4 protection caps from the cutting disk.
After turning off the appliance, the cutting disk will keep revolving for a couple of seconds.
Advantageously, each support is centered with respect to its respective cutting disk.
Apply slight pressure to the cutting disk from above, but NOT from the side.
Preferably, the cover comprises dissimilar material selected to resist cutting by a cutting disk.
Cutting disk tightening check yes - yes.
The machine stops moving, but the cutting disk spins.
The cutting disk is equipped with an automatic brake46 which stops the disk.
Mounting and removing a grinding wheel or cutting disk fig . d & e.
There is the cutting disk 7 with four steel blades 8 in the front part.
Applying one of its sides on cutting table 6 and the other on cutting disk 21.
Take the cutting disk to the 45 position with the inclination adjustment knobs See picture 7.
Slicing is implemented either by a cutting disk 29, or by laser.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Disk
Show more
Flame disk or combustion heads dirty or worn
Access to the optical disk system by developing
The disk cloning mode must be disabled
