Examples of 'cutting efficiency' in a sentence
Meaning of "cutting efficiency"
Cutting efficiency: The measure of how effectively a cutting tool or instrument can perform its intended function of cutting through materials. It indicates the ability of the tool to make clean and precise cuts
How to use "cutting efficiency" in a sentence
Basic
Advanced
cutting efficiency
This further improves the cutting efficiency.
Cutting efficiency of such a cutting tool is improved in recent years.
This ensures a particularly good cutting efficiency.
Cutting efficiency will be reduced and the blade should be replaced.
Which effectively improves cutting efficiency and accuracy.
Cutting efficiency can be determined by the amount of sparks that is produced while cutting.
Factors affecting the cutting efficiency of diamond segment.
Use of abrasive particles softer than the nozzle reduces cutting efficiency.
Maximum cutting efficiency.
Designed to enhance the properties of the filament particularly with respect to cutting efficiency.
High output and cutting efficiency.
The velocity may be chosen to minimize nerve stimulation while maintaining cutting efficiency.
Abrasive has effect of cutting efficiency and on quality of processed surface.
Fast cutting speed and small cutting gap and high cutting efficiency.
Replace the blades if cutting efficiency reduces substantially despite proper maintenance.
See also
Greater width enhances cutting efficiency.
If cutting efficiency is reduced despite proper maintenance, change the blades.
This will help increase cutting efficiency and prevent wheel loading.
Inhibiting dust formation is a matter of cutter element design to achieve optimum bit cutting efficiency.
Cutting with more than the tip will reduce cutting efficiency and overload the motor.
In another embodiment accelerating through the stratum corneum following impact may improve cutting efficiency.
When so used, improved cutting efficiency is obtained.
The sap groove prevents the blade from sticking and improves cutting efficiency.
Thus, the enhancement of cutting efficiency is enabled.
This speeds up the wear of the blade and unavoidably affects its cutting efficiency.
To improve the cutting efficiency of diamonds, change directions on a regular basis.
Additional pressure will slow down the speed of the blade and reduce cutting efficiency.
What factors affect the cutting efficiency of the diamond cutter head?
Continuing to use a dull and worn blade may cause motor overload and decreased cutting efficiency.
Therefore, improvement of the cutting efficiency is attained by increasing the amount of feed f.
Corner fast response, greatly improving cutting efficiency.
The cutting efficiency of a blade is, in part, determined by its exposure.
Cutting to the left improves the unit 's cutting efficiency.
Cutting efficiency is further enhanced by the provision of a cutter block 352 Fig.
Cutting to the right improves the unit 's cutting efficiency.
As the grains dull, their cutting efficiency falls and the penetration rate falls ( Region 1B ).
Cutting from right to left improves the unit 's cutting efficiency.
Next, Factors affecting the cutting efficiency of diamond segment.
This cavitation, in addition to the sublimation, results in an enhanced cutting efficiency.
This will improve the cutting efficiency of the trimmer . See Fig.5.
Multiple guns straight line cutting at same time, cutting efficiency is high.
Improve Cutting Efficiency - manufacturer, factory, supplier from China.
As a result, this has been a factor that cutting efficiency can not be enhanced.
This string represents an excellent compromise between aerodynamics, robustness, and cutting efficiency.
For example, a port size may be changed to maximize cutting efficiency and tissue flowability.
The cutter element may include various features, to enhance cutting efficiency.
The V-blade offers a maximum cutting efficiency.
The geometric characteristics of nickel-titanium ( niti ) instruments directly influence its cutting efficiency.
The larger this gripping force, the higher the cutting efficiency.
Using the advanced laser technology, small spot, centralized power, narrow kerf, high cutting efficiency.
You'll also be interested in:
Examples of using Cutting
Show more
When cutting a branch that is under ten
Never operate without cutting coolant or paste
Cutting threads to profile girders not required
Examples of using Efficiency
Show more
Improve the energy efficiency of a shopping centre
Efficiency and emissions requirements of combustion equipment
Liberalisation enhances efficiency of local insurance market
